Hikvision DS-2CD3666G2-IZS User Manual

Loading ...

9.1.4 Set RS-485

RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data

between the device and the computer or terminal when the communicaon distance is too long.

Before You Start

Connect the device and computer or terminal with RS-485 cable.

Steps

Go to Conguraon → System → System Sengs → RS-485 .

Set the RS-485 parameters.

Note

You should keep the parameters of the device and the computer or terminal all the same.

Click Save.

9.1.5 Set Live View Connecon

It controls the remote live view connecon amount.

Live view connecon controls the maximum live view that can be streamed at the same me.

Enter Conguraon → System → System Sengs → System Service to set the upper limit of the

remote connecon number.

9.1.6 Locaon Sengs

Locaon displays and uploads the current longitude and latude of the device.

Auto Uploading

Check Enable and set Locaon Upload Interval.

The device will upload its locaon at the set interval. You can also click Refresh to upgrade the

device locaon manually.

Manual Sengs

Check Enable and set Locaon Upload Interval. Enter the longitude and latude of the device

and click Save.

The device will upload the set locaon at the set interval.

Note

This funcon may vary according to dierent device models.

Network Camera User Manual

Loading ...

Hikvision DS-2CD3666G2-IZS 6 MP AcuSense Varifocal Bullet Network Camera