Loading ...
Loading ...
Loading ...
Figure 2-2 Install Mounting Base
6. Route the cables through the cable hole, or the side
opening.
7. Connect the cables.
8. Power on the camera to adjust view angle.
[Pan Position]
0° to 355°
[Tilt Position]
0° to 75°
[Rotation Position]
0° to 355°
Figure 2-3 3-Axis Adjustment
9. Install the bubble and black liner back, and tighten
the screws to finish installation.
Figure 2-4 Finish Installation
2.1.2 Inclined Ceiling Mounting
Before you start:
You need to purchase an inclined ceiling mount first.
Steps:
1. Paste the drill template to the celling.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Secure the inclined ceiling mount to the ceiling with
four PA4 × 25 screws (supplied).
Loading ...
Loading ...
Loading ...