Loading ...
Loading ...
Loading ...
The supplied screw package contains self-tapping
screws, and expansion bolts.
5. Route the cables through the cable hole, or the side
opening.
6. Install the camera back to the mounting base and
secure it.
Figure 2-19 Install the Camera Back
7. Connect the cables.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Tilt Position
[0°to75°]
Rotation Position
[0° to 360°]
Pan Position
[0° to 360°]
Figure 2-20 3-Aixs Adjustment
2.3.2 Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Drill screw holes on the wall.
2. Take apart the junction box, and align the screw
holes of the mounting base with those on the
junction box’s cover.
3. Install the mounting base to the junction box’s cover
with three PM4 screws.
Figure 2-21 Secure Mounting Base on Junction Box’s
Cover
4. Secure the junction box’s body on the wall with four
PA4 × 25 screws.
Loading ...
Loading ...
Loading ...