Loading ...
Loading ...
Loading ...
Figure 2-12 Attach Camera on Junction Box’s Cover
6. Secure the junction box’s body on the ceiling/wall
with three PA4 × 25 screws (supplied).
Junction Box
Body
Figure 2-13 Secure Junction Box on Wall/Ceiling
7. Route the cables through the bottom cable hole, or
the side cable hole of the junction box and connect
the cables.
8. Fix the junction box cover on its body with three
PM3 × 16 L6 screws that come with the junction
box.
Figure 2-14 Combine Junction Box Cover and
Body
9. Repeat the step 9 to 10 of 2.2.1 Ceiling/Wall
Mounting Without Junction Box to finish the
installation.
2.2.3 Adjust Zoom and Focus
Steps:
1. Remove the cover on the bottom of the device.
2. Tighten or loosen the screws by the cover to adjust
the zoom and focus.
F/N: Screw to the direction of F to focus far,
and screw to the direction of N to focus near.
T/W: Screw to the direction of T to zoom in,
and screw to the direction of W to zoom out.
Loading ...
Loading ...
Loading ...