Loading ...
Loading ...
Loading ...
14
NOTE
ELECTRONIC CONTROL
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
fast freeze Activates a faster rate for freezing food.
fast ice Increases the production of ice
energy saver Keep this switch set on energy saver (light on) for lowest energy us
age. If moisture appears on the cabinet between the doors, pressing
this button will turn the light off and enable an electric heater used to
reduce moisture on the cabinet between the doors.
water lter Press and hold for three seconds to reset after lter change.
air lter Filter condition status is always displayed when door is open. Press
and hold for three seconds to reset after lter change.
temp mode Touch to toggle display from Fahrenheit to Celsius.
mute sounds Tones emitted by each key press can be turned off based on user
preference. The sounds are muted when the red indicator is lit. Warn-
ing signals will stay active.
default settings Resets all refrigerator settings such as temp, temp display and tones
to their factory default settings.
on off Press and hold for three seconds to turn off the cooling system to
clean the refrigerator. It also turns off the ice maker. The temperature
displays will read OFF.
Pressing the system on/off icon does not
turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.
Setting cooling temperatures
Press the + or – indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the rst touch. The display will time out
after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm
will sound and the door ajar indicator will display on the bottom display
of the control panel. The alarm is turned off by closing the door. The
mute sounds key will blink to prompt the reset of any active alarms.
Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the temperature display
will blink and display “HI”. After 20 minutes, the alarm will sound and
the high temp indicator will be red on the bottom of the control panel.
The mute sounds icon will illuminate until pressed, acknowledging the
alarm, at which time the highest temperature reached will be displayed
and the refrigerator will resume normal operation. In case the high temp
alarm is not acknowledged at the rst alarm sound time out, when the
door is rst opened, the alarm sound will be repeated.
Power fail In the event of a power failure, the power fail alert will be displayed and
the temperature display will blink until the mute sounds icon is pressed,
acknowledging the alarm. Other modes may be turned off until the alarm
is acknowledged. The power fail alert is turned off and the refrigerator
will resume normal operation. The high temp alarm may also be illumi
nated until a safe operating range temperature has been reached.
Figure 30
Loading ...
Loading ...
Loading ...