1
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
2
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Contents
Page No.
2 Contents
3 Reading and Storing the User Manual
3 Important Safety Instructions for Proper Use
6 Explanation of Symbols
7 Description of Parts & Accessories
8 Assembling Your Vacuum Cleaner
9 Before First Use of Your Vacuum Cleaner
9 Charging the Battery
10 Using Your Vacuum Cleaner
11 Changing the Power level of Your Vacuum Cleaner
11 Removing the Motor Unit for Handheld Use
12 Attaching the Tools to the Motor Unit
13 Using Your Vacuum Handheld
13 Changing the Power Level of the Motor Unit
13 Emptying and Cleaning Your Vacuum Cleaner
15 Dismantling the Filter Assembly
16 Reassembling After Cleaning
17 Recommended Filter Cleaning Intervals
18 Dismantling Your Vacuum Cleaner
18 Removing the Brush Bar for Cleaning
19 Cleaning the Brush Bar
19 Replacing the Brush Bar
20 Using the Carrying Strap
20 Care and Maintenance of Your Vacuum Cleaner
20 Storing Your Vacuum Cleaner
21 Troubleshooting Guide
22 Technical Specification
22 Recycling Information
23 Customer Support
Back Page Warranty Information
3
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
READING AND STORING THE USER MANUAL
Before using this product, please read through this manual
carefully paying particular attention to the safety instructions.
Failure to do so may result in personal injury or damage to the
product.
Carefully save this instruction manual for future reference. Ensure the
user manual is included when passing the product on to any third
parties.
IMPORTANT SAFETY INSTRUCTIONS FOR PROPER USE
When using electrical appliances, basic safety precautions should always
be followed.
Only use the product as described in this user manual. Any other use is
considered improper and may result in damage to property or persons.
The manufacturer or vendor cannot be held liable for damages or injury
incurred through improper or incorrect use.
• Read and familiarise yourself with all operating
instructions before using this Vacuum Cleaner.
• Before plugging your unit into the mains, visually check
that the unit is intact and has not suffered any transit
damage.
• Check that the voltage indicated on the data plate
corresponds with that of the local network before
connecting the appliance to the mains power supply.
• This appliance can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Keep the appliance and its cord out of reach of children
less than 8 years when it is energised or cooling down.
• DO NOT immerse the appliance or its cord in water or any
other liquids.
• DO NOT leave the appliance unattended during use.
• DO NOT leave the appliance unattended whilst connected
to the mains supply.
4
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
• DO NOT use this appliance outdoors.
• It is imperative to unplug the power cord after the
appliance has been used, before it is cleaned and whilst
being repaired.
• Repairs to electrical appliances should only be performed
qualified personnel. Improper repairs may place user at
serious risk.
• DO NOT operate this appliance with a damaged plug or
cord, after a malfunction or after being dropped or
damaged in any way.
• Regular, periodic checks should be carried out on the
mains cable to ensure no damage is evident. Should there
be any signs of damage the appliance should not be used.
• If the power cable is damaged, it should only be replaced
by suitable qualified personnel in order to avoid a hazard
• DO NOT allow the mains cable to hang over sharp edges
or come in contact with hot surfaces.
• Allow the unit to cool before storage.
• Before cleaning, disconnect the appliance from the mains
supply and allow to cool.
• This appliance is intended for household use only and
should not be used for industrial purposes.
• DO NOT use any accessories or attachments with this
appliance other than those supplied or recommended by
supplier.
• DO NOT use this appliance for anything other than its
intended use.
• DO NOT push objects into any openings as damage to the
appliance and/or electric shock may occur.
• Unplug after each use. Grasp the plug, not the cord.
• DO NOT pull or carry the Vacuum Cleaner by the electrical
cord, use the handle provided.
• Ensure fingers and other objects are never placed in any
part of the vacuum cleaner. Clothing or hair may become
trapped if the vacuum is used improperly.
5
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
• Keep hair, loose clothing, jewellery, fingers and all parts of
the body away from openings and moving parts.
• Keep all air vents clear and free of dust, lint, hair and
anything else that may reduce airflow.
• Avoid directing the appliance towards naked flames as the
air discharged may extinguish gas fires or pilot lights and
may disturb ashes in open fires.
• DO NOT Vacuum water or any other liquids with this
vacuum.
• DO NOT Vacuum hot ashes or lit cigarettes, etc.
• Never use the appliance without the filter in place.
• DO NOT use the Vacuum with without the Dust
Compartment attached.
• DO NOT vacuum any large or broken objects such as glass.
• DO NOT vacuum anything that is burning or smoking such
as cigarettes, matches or hot ashes.
6
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Explanation of Symbols
The following warning symbols or words are used in this instruction manual:
Products labelled with UK Conformity Assessment identifies
products conforming to UK statutory requirements.
Products labelled with this symbol conform to applicable
provisions of the European Economic Area.
You should now recycle your waste electrical goods and in doing
so help the environment. This symbol means waste electrical
products at the end of their useful life should not be disposed of
with normal household waste and not sent to landfill. Please
ensure it is taken to a suitable facility for disposal. Check with
your Local Authority or retailer for recycling advice or visit
www.recycle-more.co.uk, enter your postcode to find out your
nearest recycling site.
This symbol means batteries and rechargeable batteries may not
be disposed of with household waste!
As the end user you are required to bring all batteries and
rechargeable batteries to a collection point run by the Local
Authority or to a retailer, so that they can be disposed of in an
environmentally friendly manner.
This symbol provides useful additional information on the
use of this product.
This symbol indicates that the supply uses an alternating current
mains supply.
This symbol identifies voltage and the current rating for direct
current.
WARNING!
This designates a hazard with moderate risk, which may result
in severe injury or damage to the product if not adhered to.
7
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
Description of Parts & Accessories
11. Floor LEDs
12. Motorised Floor Tool
13. Dust Release Catch
14. Dust Compartment
15. Filter Assembly
16. Dust Compartment Release Catch
17. Charging Indicators
18. Motor Unit Power Button
19. Motor Unit On/Off Button
20. Frame (Rear)
21. Upholstery Tool
22. Shoulder Strap
23. Adaptor
24. Crevice Tool
25. Battery Charger
26. Long Reach Crevice Tool
27. Charging & Storage Base
28. Flexible Hose
1
5
7
14
13
17
11
21
22
2
4
26
24
15
18
19
23
12
24
1. Handle
2. On/Off Button
3. Power Level Indicator(s)
4. Power Level Button
5. Handle Release Button
6. Motor Unit Release Button
7. Motor Unit Handle
8. Motor Unit
9. Charging Port (In Base)
10. Floor Tool Release Button
9
8
25
27
6
10
16
28
20
3
3
8
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Assembling Your Vacuum Cleaner
Assemble your vacuum cleaner using the four steps below:
A. Insert the Motor Unit (8) into the Frame (20) as shown in ‘A’ above, push the
motor unit against the frame until it clicks home.
B. Attach the Motor Unit (8)/Frame (20) assembled above in ‘A’ into the top of
the Motorised Floor Tool (12) as shown in ‘B’ above,
C. Insert the Handle (1) into the top of the Frame (20) as shown in ‘C’ above.
D. Finally, attach the Flexible Hose (28) to the top of the Handle (1) and the rear
of the Frame (20) as shown in ‘D’ above.
Twist the hose a quarter of a turn clockwise to lock it into place.
A
B
C
D
8
1
12
28
20
20
8
9
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
Before the first time you use Your Vacuum Cleaner
Remove all packing materials and discard responsibly.
Ensure that all parts are present – See Description of Parts above and that there
is no damage to any component or the Battery Charger (25).
Charging the Battery
Before use, please ensure that the internal rechargeable battery is fully charged as
follows:
1. Push the rear section of the Charging & Storage Base (27) into place then insert
the small round plug of the Battery Charger (25) into the charging socket on the
side of the Charging & Storage Base (27) – see ‘Fig 1’ above.
2. Place the vacuum onto the Charging & Storage Base (27) as shown in ‘Fig 2’
above, ensuring it locks securely onto the rear section of the Charging & Storage
Base (27).
3. Alternatively, the Battery Charger (25) can be plugged directly into the Motor
Unit (8) as shown in ‘Fig 3’ above.
4. Plug the Battery Charger (25) into the nearest mains socket.
5. The Charging Indicators (17) will light in the sequence as in a, b, c below to
show the internal battery is charging:
a.
b.
c.
Fig 1
Fig 2
Fig 3
10
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
6. Once the battery is fully charged (after approximately 4.5 - 5 hours), the
Charging Indicators (17) will have all LEDs fully lit as in ‘c’ above indicating that
it is fully charged and the Battery Charger (25) can be removed and the
vacuum used.
NOTE the vacuum cleaner cannot be used whilst connected to the charger.
Whilst using your Vacuum Cleaner, the lights on the Charging Indicators (17)
will slowly go out one at a time.
After a run time of approximately 35 minutes, all the Charging Indicators (17) will
have gone out and the internal battery will require recharging as above.
Using Your Vacuum Cleaner
1. To operate the vacuum cleaner, grip the vacuum by the
Handle (1) and press the On/Off Button (2) at the top of
the Handle (1) which will light up blue.
The vacuum cleaner will power up and the Floor LEDs
(11) on the front of the Motorised Floor Tool (12) will
illuminate.
2. Place your foot gently on the
Motorised Floor Tool (12) and pull
the cleaner back by the Handle (1)
and start vacuum cleaning.
1
2
2
11
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
Changing the Power level of Your Vacuum Cleaner
Right: Your vacuum will power up in low power mode.
To change the vacuum power level, press the Power
Level Button (4) mounted on the Handle (1). Each
press of the button will alternate between low and
high power levels.
Below: The power level selected will be shown by the
Power Level Indicator (3) lighting blue for low power
and red for high power as shown.
Removing the Motor Unit (8) for Handheld Use
To use your vacuum cleaner handheld, first remove the Motor Unit (8) by holding
the Motor Unit Handle (7) and pressing the Motor Unit Release button (6) on top
of the unit.
Press the Motor Unit
Release Button (6) to
remove the Motor Unit (8).
Low Power
High Power
4
or
12
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Attaching the Tools to the Motor Unit (8)
a. 2in1 Multi Tool (21)
Insert the Adaptor (23) into the Motor Unit (8) and then attach the Upholstery
Tool (21) to the adaptor as shown below:
Left: The Upholstery Tool (21) can be
used for cleaning stairs and other hard
to get at areas.
To use the Upholstery
Tool (21) with the
brush, press the
button (arrowed left)
and pull the brush
down.
b. Long Reach Crevice Tool (26)
Insert the Adaptor (23) into the Motor Unit (8) and then attach the Long Reach
Crevice Tool (26) to the adaptor as shown below:
Right: The Long Reach Crevice Tool
(26) can used to clean surfaces that
are high up or difficult to reach.
c. The Crevice Tool (21)
Left: Attach the Crevice Tool (21)
directly to the Motor Unit (8).
The Crevice Tool (21) can be used for
cleaning upholstery and other areas
where dust and dirt can get trapped.
13
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
1. Once the dust level reaches the ‘MAX’
mark on the Dust compartment (14) it will
require emptying and the Filter Assembly
(15) cleaned.
WARNING! DO NOT continue to use
your vacuum cleaner once the ‘MAX’ mark
has been reached as permanent damage
may occur to the appliance.
d. The Flexible Hose (28)
Right: If a longer reach is required whilst
using the tools first attach the Flexible
Hose (28) to the Motor Unit (8) and then
attach the tools to the end of the hose as
described above.
Using the Vacuum Handheld
Having connected the desired tool, operate the Motor Unit (8) as follows:
Grip the unit by the Motor Unit Handle (7) and press the Motor Unit On/Off
Button (19) positioned below the Handle (7).
The Motor Unit (8) will power up and Charging Indicators (17) will illuminate
(according the battery charge state).
Changing the Power level of the Motor Unit (8)
To change the Motor Unit (8) power level,
press the Motor Unit Power Button (18). Each
press of the button will alternate between low
and high power levels.
The power level selected will be shown by the
Power Level Indicator (3) – blue for low power
and red for high power as shown right:
Emptying and Cleaning Your Vacuum Cleaner
MAX
1
Low Power
High Power
or
3
18
14
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Emptying the Dust Compartment (14)
2. Right: To empty the cleaner, hold the
Motor Unit (8) upright over a waste bin
then press the Dust Release Catch (13 –
arrowed right) to allow the door in the
base to swing open and allow the dust
to fall into the bin.
Cleaning the Filter Assembly
3. Left: To clean the Filter Assembly (15) first
remove the Dust Compartment (14) as
follows:
Press the Dust Compartment Release Catch
(16 – arrowed left) to disconnect the Dust
Compartment (14) from the Motor Unit (8).
NOTE support the Dust Compartment (14)
before pressing the Dust Compartment
Release Catch (16) so that it does not fall.
2
3
15
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
4. Left: Lift the handle up at
the top of the Filter
Assembly (15) and pull the
filter out of the Dust
Compartment (14)
Dismantling and Cleaning the Filter Assembly (15)
Dismantle the Filter Assembly (15) by pulling the Hepa out of the cyclonic filter as
shown below:
5. Left: Wash the hepa
filter in warm running
water until clean.
Allow the filter to dry
thoroughly for 24
hours before reuse.
5
0
4
16
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
6. Right: Wash the cyclonic filter in warm running
water until clean. Allow the filter to dry
thoroughly for 24 hours before reuse.
Reassembling After Cleaning
7. Left: To reassemble the Filter
Assembly (15), replace the Hepa
filter into the recess in the top of the
cyclonic filter.
8. Right: Lower the Filter Assembly
(15) into the Dust Compartment
(14) and fold the handle flat.
DO NOT replace the filters if they
are damp or wet. Ensure they are
thoroughly dry beforehand.
WARNING! DO NOT use your
vacuum cleaner without the filters
fitted as this will cause permanent
damage to the cleaner.
6
7
8
8
17
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
9. Right: Finally, re-attach the Dust
Compartment (14) to the Motor Unit (8)
by hooking the Dust Compartment (14)
onto the rear of the Motor Unit (8) and
then bring the front up until the catch
clicks locked as shown right:
Recommended Filter Cleaning Intervals
Filter Type
Recommended Cleaning Period
WARNING! Ensure the filters are cleaned periodically according to the table
above, failure to clean the filters regularly will severely impair the performance
and permanent damage may occur to the appliance.
9
8
• Shake
out
debris
when
you
empty
the dust
container
•
Rinse
under
war
m
water
once
a
month
• Allow to dry thoroughly for 24 hours before reuse.
0
• Shake
out
debris
once
a
month
•
Rinse
under
war
m
water
once
a month.
• Allow to dry thoroughly for 24 hours before reuse.
Hepa Filter
Cyclonic Filter
18
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Dismantling Your Vacuum Cleaner
To remove the Handle (1) from the Frame (20) press
the Handle Release Button (5) and remove the
Handle (1) as shown right:
To remove the Motorised Floor Tool (12), press
the Floor Tool Release Button (10) and remove.
Removing the Brush Bar for Cleaning
Remove the Brush Bar from the Motorised Floor Tool (12) using the guide below:
Above: Turn the vacuum upside down and then slide the retaining clip arrowed
above, on the underside towards the front of the Motorised Floor Tool (12), lift
the clip up and remove the clip and the floor brush.
19
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
Cleaning the Brush Bar
Replacing the Brush Bar
Below: lower the left hand end in first so that the spindle locates into the end of
the Brush Bar. Lower the right hand end down until the clip can be pushed up to
lock the Brush Bar back into place.
Left: Use a soft
brush to remove
dust and use
scissors to remove
hairs from the
Brush bar.
20
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Using the Carrying Strap (22)
Left: Instead of using the Motor Unit Handle (7), The
Motor Unit (8) can be slung over the shoulder during
use using the Shoulder Strap (22). Loop the strap
through the Motor Unit Handle (7) and place it onto
the shoulder as shown.
Care and Maintenance of Your Vacuum Cleaner
• Always disconnect the cleaner from the battery charger before cleaning.
• Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or
abrasive cleaners.
• Do not submerge the cleaner in water or any other liquids.
• Empty the Dust Compartment (14) as soon as the ‘MAX’ mark has been
reached.
• Wash the Filter Assembly (15) regularly – see table below.
• Allow the filters to thoroughly dry out for 24 hours before reassembly and use.
WARNING! DO NOT continue to use your vacuum cleaner once the ‘MAX’
mark has been reached as permanent damage may occur to the appliance.
Storing Your Vacuum
Whilst not in use place the vacuum cleaner
onto the Charging Base (27), also, the base
can be used to store tools as shown below
right:
Store the vacuum in a cool, dry place away
from direct sunlight.
21
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
Troubleshooting Guide
Problem
Possible Cause
Possible Solution
Unit fails to turn on.
Internal battery not
charged.
The vacuum cleaner has
not been correctly
placed onto the
Charging & Storage
Base (27).
The Battery Charger
(25) is not plugged into
the mains socket.
The small round plug of
the Battery Charger is
not plugged into the
Charging & Storage
Base (27).
Charge the internal battery
– see Charging the Internal
Battery above.
Ensure the vacuum cleaner
is placed properly onto the
Charging Base – see
Charging the Internal
Battery above.
Ensure the battery charger
is fully inserted into the
mains socket and the socket
is switched on (if
applicable).
Ensure the small round plug
of the battery charger is
plugged into the charging
base.
Low suction or poor
pick-up.
Dust Compartment (14)
is full.
Filters are clogged.
Too lower Power setting
selected.
Empty the Dust
Compartment – see
Emptying Your Vacuum
Cleaner above.
Check and clean the filters.
Press the Power Control
Button (4 or 18) to select a
higher power setting.
The vacuum is making a
“hissing” sound.
The airflow is restricted.
Empty the Dust
Compartment.
Check and clean the filters.
Clear any blockages if
necessary.
22
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Technical Specification
Recycling Information
Disposal of the Packaging
Dispose of paper and cardboard in appropriate paper re-cycling facilities.
Dispose of recyclable plastics in appropriate plastic re-cycling facilities.
Dispose of non-recyclable plastics in the appropriate plastics collection service.
Disposal of the Product
You should now recycle your waste electrical goods and in doing so
help the environment. This symbol means waste electrical products
at the end of their useful life should not be disposed of with normal
household waste and not sent to landfill. Please ensure it is taken to
a suitable facility for disposal. Check with your Local Authority or
retailer for recycling advice or visit www.recycle-more.co.uk, enter
your postcode to find out your nearest recycling site.
Model Number
FLR00147
Battery Charger
Input: AC 100-240V ~ 50/60Hz 0.5A (max.)
Output: 36V DC 500mA 18W
Rated Power
250W
Motor Type
BLDC
Battery
29.6V 2200mAh Li-Ion (8 cells)
Charge Time
4.5 - 5 hours
Run Time After a Full Charge
35 Minutes (max.)
Unpacked Weight
4.0 Kgs (approx.)
Filtration (Dust
Compartment)
Hepa & Cyclonic Filter
Dimensions
26cm (d) x 26cm (w) x 112.5cm (h) (approx. inc.
stand)
Vacuum
≥20kpa (max.)
Noise Level
≤78dB (approx.)
Dust Compartment Capacity
0.55L
23
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cordless Upright Vacuum
Model No. FLR00147
User Manual
24
Cordless Upright Vacuum
Model No. FLR00147
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARRANTY
Thank you for purchasing your Daewoo Vacuum.
As part of our commitment to quality, we are offering you an extra 2 years warranty in
addition to your 1 year guarantee
Your Daewoo vacuum product is guaranteed for 1 year from the date of original purchase,
with proof of purchase or receipt. If any defect should occur due to faulty workmanship or
material, your faulty vacuum should be returned to the place of purchase, replacement or refund is
at the discretion of the retailer.
The guarantee is subject to the following provisions:
•
The product must be correctly installed and operated in accordance with the
requirements contained in the instruction manual.
•
The product must be used solely for domestic purposes.
•
It does not cover general wear and tear, damage, misuse or any consumable parts.
•
The guarantee will be rendered invalid if the product is re-sold or has been damaged through
inexpert repair.
•
The guarantee is only valid within the UK and Eire.
Your standard 1 year guarantee will only be extended to the maximum available for your
individual product upon registration. (Note: products must be registered individually and
covers the main body and housing). If you do not register your product within 28 days of the
original purchase date, your product will only be guaranteed for 1 year.
To validate your extended 2 year warranty*please register your purchase online within 28
days of the original purchase date by registering at:
https://help.daewooelectricals.com
or
Contact Us (daewooelectricals.com)
*Your extended warranty is only valid with proof of purchase receipt and subject to the
conditions outlined above.
Daewoo is a registered trademark.
Produced and imported under licence by
Eurosonic Group Limited
Brightgate House
1 Brightgate Way, Stretford,
Manchester, M32 0TB, UK
EU Rep: EuroSonic Magppie (ESM) Ltd. Ireland D05 X006
www.esgltd.com
