Loading ...
Loading ...
Loading ...
APY74529—UN—07JUN22
10. Connect mower drive belt:
● Install belt onto the engine sheave.
IMPORTANT: Avoid damage! Left and right spindle sheaves
are hidden by belt shields. Failure to position the belt
properly on sheaves may result in belt damage.
● Install 3/8 inch ratchet onto the square hole (H) in the tension
arm and rotate counterclockwise to release tension on the belt.
Lift right spindle cover and install belt onto right spindle sheave
(I). Make sure that belt is properly seated on all sheaves.
11. Flip up left and right spindle covers to verify that belt is properly
seated in both spindle sheaves.
12. Install foot plate.
GH8XT3T,00008DB-19-13JUN22
Installing Mower Deck (48A and 54A)
1. Park machine safely. (See Parking Safely in the Safety Section.)
2. Allow engine and mufer to cool completely.
CAUTION: Avoid injury! Rotating blades are dangerous.
Before adjusting or servicing mower:
• Disconnect spark plug wires or battery negative (-) cable to
prevent engine from starting accidentally.
• Always wear gloves when handling mower blades or
working near blades.
APY69519—UN—08MAR22
3. Rotate the height-of-cut dial (A) counterclockwise direction to the
highest range in index mark (B) to raise mower deck.
NOTE: Ensure to remove the tracking adjustment socket used for lift
system before installation of mower deck.
4. Slide mower deck under machine.
APY69550—UN—07MAR22
5. Move mower deck forward and lower front draft rod (A) into the front
mower deck brackets (B).
GXT003024—UN—10JUN16
6. Lower mower lift lever, and install the pin (C) and spring pin (D) onto
each side of the rear mower bracket.
CAUTION: Avoid injury! Component is spring-assisted and
under tension. Injury can occur if spring-assisted
component is released suddenly.
Service Mower
39
Loading ...
Loading ...
Loading ...