Loading ...
Loading ...
Loading ...
Gasoline Engine Oil
SAE 5W-40
SAE 30
SAE 40
SAE 5W-30
SAE 10W-30
SAE 10W-40
SAE 15W-40
0
o
C
-10
o
C
-20
o
C
-30
o
C
-40
o
C
10
o
C
20
o
C
30
o
C
40
o
C
50
o
C
32
o
F
14
o
F
-4
o
F
-22
o
F
-40
o
F
50
o
F
68
o
F
86
o
F
104
o
F
122
o
F
TS1744—UN—25AUG20
Oil Viscosities for Air Temperature Ranges
Use oil viscosity based on the expected air temperature range during
the period between oil changes.
Using single viscosity grade oils such as SAE 30 or SAE 40 can
reduce oil consumption in air cooled engines.
The following oils are approved:
● John Deere Plus-50™ II
● John Deere Turf-Gard™
Other oils may be used if they meet one or more of the following:
● ILSAC GF-6A
● API Service Category SP
● API Service Category SN
● API Service Category SM
● API Service Category SL
● API Service Category SJ
● ACEA Oil Sequence A3/B3
● ACEA Oil Sequence A3/B4
● ACEA Oil Sequence A5/B5
● ACEA Oil Sequence C5
● ACEA Oil Sequence C4
● ACEA Oil Sequence C3
● ACEA Oil Sequence C2
● ACEA Oil Sequence C1
DX,ENOIL2-19-15JUL20
Checking Engine Oil Level
IMPORTANT: Avoid damage! Failure to check the oil level
regularly could lead to serious engine problems if oil level is
out of the operating range:
● Check oil level before operating.
● Check oil level when the engine is cold and not running.
● Keep oil level between the dipstick marks.
● Shut off engine before adding oil.
NOTE: Check oil twice a day if you run engine over 4 hours in a day.
Make sure that engine is cold when checking engine oil level.
1. Park machine safely. (See Parking Safely in the Safety section.)
IMPORTANT: Avoid damage! Dirt and contamination can enter
engine when checking oil level. Clean area around dipstick
before loosening or removing.
2. Clean area around the dipstick to prevent debris from falling into
crankcase.
GX535578—UN—19APR22
3. Remove dipstick (A). Wipe with clean cloth.
4. Install and tighten the dipstick.
5. Remove dipstick.
6. Check oil level on dipstick. Oil must be between ADD and FULL
marks.
7. If oil level is low, add oil to bring oil level no higher than FULL mark
on dipstick. Do not overll.
8. Install and tighten the dipstick.
H9PQBYK,0000059-19-21APR22
Changing Conventional Engine Oil and Filter
IMPORTANT: Avoid damage! Operating in extreme conditions
may require more frequent service intervals:
● Engine components may become dirty or plugged when
operating in extreme heat, dust, or other severe
conditions.
● Engine oil can degrade if machine is operated constantly
at slow or low engine speeds or for frequent short
periods of time.
1. Run engine to warm oil.
2. Park machine safely on the level surface. (See Parking Safely in
the Safety section.)
IMPORTANT: Avoid damage! Dirt and contamination can enter
engine when checking oil level. Clean area around dipstick
before loosening or removing.
Plus-50 is a trademark of Deere & Company
Turf-Gard is a trademark of Deere & Company
Service Engine
27
Loading ...
Loading ...
Loading ...