LG Electronics CBIH3617BE Smart Induction Cooktop -

Owner’s Manual English,Spanish - Page 15

For CBIH3617BE.

PDF File Manual, 148 pages, Download pdf file

Loading ...
Loading ...
Loading ...
15INSTALLATION
ENGLISH
All dimensions are stated in inches and millimeters (mm).
Allow 2 (50 mm) below the armored cable opening to clear the electric cable and allow space for
installation of the junction box on the wall at the back of the cooktop.
Thickness of glass: 3/16" (4 mm)
CAUTION
To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located
above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a
range hood that projects horizontally a minimum of 5 (127 mm) beyond the face of the cabinets.
F
Distance from bottom of upper plate to bottom of
cooktop base
2 1/2"
(64 mm)
2 7/16"
(61 mm)
GHeight of conduit
1 7/16"
(37 mm)
1 1/8"
(29 mm)
H Distance from side edge of cutout to side of counter
2 1 1/8" (28 mm)
I Width of cutout
2 28 1/2" (724 mm)
1 28 5/8" (727 mm)
2 33 7/8" (860 mm)
1 33 15/16" (863 mm)
J Depth of cutout
2 19 5/8" (498 mm)
1 19 11/16" (501 mm)
2 19 1/8" (486 mm)
1 19 3/16" (488 mm)
K Depth of bottom cabinets 23 13/16" (605 mm) 23 3/8" (593 mm)
L Distance from front of counter to front edge of cutout
2 2 3/16" (55 mm)
M
Distance from rear edge of cutout to nearest
combustible surface
2 2 1/16" (52 mm)
N
Height below cutout (Empty space is needed
underneath the cooktop for optimum performance.)
2 5 7/8"
(149 mm)
2 5 3/4"
(146 mm)
O Depth of overhead cabinets
1 13" (330 mm)
P
Clearance from top of cooking surface to bottom of
overhead cabinets
2 30"
(762 mm)
2 36"
(914 mm)
Q
Clearance from countertop to bottom of adjacent
cabinets
2 18" (457 mm)
R Junction box (approximate location) 12" (305 mm)
S Junction box (approximate location) 10" (254 mm)
T
Distance from edge of cooktop to nearest
combustible wall (either side of unit)
2 2" (50 mm)
- Dimension/Clearance 30" Cooktop 36" Cooktop
en-us_main.book.book Page 15 Friday, February 2, 2024 8:51 AM
Loading ...
Loading ...
Loading ...