DELUXE CLIP-ON EAR DEFENDERS
MODEL NO: SSP19CO
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Put the ear defenders on before exposing yourself to noise and wear them during the whole noise exposure. Be
warned that failure to adhere to these recommendations will cause the protection aorded by the product to be severely impaired.
9 Regularly check for serviceability.
9 Ear defenders may be adversely aected by certain chemical substances. Further information should be sought from manufacturer of the
chemicals that they may come into contact with.
9 Ear defenders and in particular the cushions, may deteriorate with use and should be examined at frequent intervals for cracking and
deterioration. Replace after 2 to 3 years of normal use or sooner if there are any signs of deterioration.
8 DO NOT replace any parts, there are no replacement parts.
9 The tting of hygiene covers to the cushions may aect the acoustic performance of the ear defenders.
9 Ear protection will be reduced if the defenders are not well tted and not regularly checked.
9 If the recommendations given in the instructions are not followed, the protection provided by the ear defenders will be signicantly
reduced.
WARNING! These ear-defenders are of universal size range. Ear-defenders complying with EN 352-1 are of universal size range.
Universal ear-defenders include small, medium and large size and are thus designed to t the majority of wearers including for those
whom medium size does not t.
2. INTRODUCTION
Lightweight, yet rugged construction, certied to BS EN 352-3:2002 standard. Hearing protection level in excess of the standard, with an SNR of
30dB. Fully adjustable ear cups to ensure a precise seal against the head. Suitable for use on all Worksafe helmets or any helmet with a 30mm
xing point. Fully approved to protect against high noise levels in most working environments. Nett weight: 295g
3. ATTENUATION VALUES
4. USE
A. Attach ear defenders to each side of the hard hat by sliding them into the slots.
B. Slide each ear defender housing down into the slots on each side of the helmet.
C. Place hard hat on head and adjust the ear defenders by sliding cups up and down.
D. Ensure the ear defenders are rmly attached by lifting the arms up and down.
E. To remove, push clip outwards from inside the helmet and pull from the helmet.
Refer to
instruction
manual
Original Language Version
© Jack Sealey Limited
SSP19CO Issue:1 08/07/20
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
SSP19CO Issue:1 08/07/20
Original Language Version
© Jack Sealey Limited
5. CLEANING
5.1. Clean with warm soapy water, DO NOT use organic solvents or alcohol for cleaning.
5.2. DISINFECTION
5.2.1. Disinfect every 3 months according to use.
5.2.2. Any part of the ear defender which is in contact with the wearer, shall be disinfected with a product suitable for use on plastics,
(materials used: Polycarbonate/Polyoxymethylene headband, Acrylonitrile Butadiene Styrene/High Impact Polystyrene cup and soft
Polyvinyl Chloride leather) and not known to be harmful to the wearer.
6. STORAGE
6.1. When not in use store in a clean and dry poly-bag.
