1. SAFETY
WARNING! Put the ear defenders on before exposing yourself to noise and wear them during the whole noise exposure. Be
warned that failure to adhere to these recommendations will cause the protection aorded by the product to be severely
impaired.
9 Regularly check for serviceability.
9 Ear defenders may be adversely aected by certain chemical substances. Further information should be sought from manufacturer of
the chemicals that they may come into contact with.
9 Ear defenders and in particular the cushions, may deteriorate with use and should be examined at frequent intervals for cracking and
deterioration. Replace after 2 to 3 years of normal use or sooner if there are any signs of deterioration.
8 DO NOT replace any parts, there are no replacement parts.
9 The tting of hygiene covers to the cushions may aect the acoustic performance of the ear defenders.
9 Ear protection will be reduced if the defenders are not well tted and not regularly checked.
9 If the recommendations given in the instructions are not followed, protection provided by the ear defenders will be signicantly reduced.
WARNING! These ear defenders are of universal size range. Ear defenders complying with EN 352-1 are of universal size range
Universal ear-defenders include small, medium and large size and are thus designed to t the majority of wearers including for those
whom medium size does not t.
2. INTRODUCTION
Lightweight, yet rugged construction, certied to BS EN 352-1:2020 standard. Hearing protection level in excess of the standard, with
an SNR of 33dB. Fully adjustable ear cups to ensure a precise seal against the head. Arms fold in for easy storage. Fully approved to
protect against high noise levels in most working environments.
3. ATTENUATION VALUES
4. USE
4.1. Unfold the ear defenders.
4.2. Place cups over the ears, adjust the height for optimum comfort by sliding the cups up or down whilst holding the headband in place.
4.3. Ensure the headband rests on the top of the head to support the defenders.
4.4. Make sure the cushions form a snug seal around the ears and reduce noise eectively.
5. CLEANING
5.1. Clean with warm soapy water, DO NOT use organic solvents or alcohol for cleaning.
5.2. Disinfect every 3 months according to use.
5.3. Any part of the ear defender which is in contact with the wearer, shall be disinfected with a product suitable for use on plastics,
(materials used: Polycarbonate/Polyoxymethylene headband, Acrylonitrile Butadiene Styrene/High Impact Polystyrene cup and soft
Polyvinyl Chloride leather) and not known to be harmful to the wearer.
6. STORAGE
6.1. When not in use store in a clean and dry poly-bag.
DELUXE EAR DEFENDERS - FOLDING
MODEL NO: SSP19F
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
Original Language Version
© Jack Sealey Limited
SSP19F (EN 352-1) SNR=33dB H=35dB M=32dB L=23dB
Frequency (Hz) 63 125 250 500 1000 2000 4000 8000 SNR
M
=34.5dB SNR
s
=1.6dB
Mean attenuation (dB) 22.6 15.5 25.7 33.0 39.8 36.1 39.5 35.7 H
M
=37.4dB H
s
=2.0dB
Standard Deviation (dB) 2.8 1.6 2.2 2.8 3.3 2.4 3.4 2.2 M
m
=33.2dB M
s
=2.6dB
Assumed protection (dB) 19.7 13.9 23.5 30.2 36.5 33.8 36.1 33.4 L
m
=24.2 L
s
=1.5dB
SSP19F Issue 5 (4) 13/07/23
Original Language Version
© Jack Sealey Limited
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
SSP19F Issue 5 (4) 13/07/23
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
