Loading ...
Loading ...
Loading ...
64
Chapter 4 PoE Management
PoE is an acronym for Power over Ethernet. Power over Ethernet is used to transmit electrical
power, to remote devices over standard Ethernet cable. It could for example be used for
powering IP telephones, wireless LAN access points and other equipment, where it would be
difficult or expensive to connect the equipment to main power supply.
4-1 PoE Configuration
This page allows the user to inspect and configure the current PoE port settings and show all
PoE Supply W.
Web Interface
To configure Power over Ethernet in the web interface:
1. Click PoE Management and PoE Configuration.
2. Specify the PoE or PoE+ Mode, Priority and Maximum Power(W).
3. Click Apply to save the configuration.
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 4-1: PoE Configuration
Parameter description:
PoE Power Supply Configuration
Primary Power Supply [W] :
To display watts for the primary power supply.
Capacitor Detection :
Click to enable or disable the capacitor configuration.
PoE Port Configuration
Loading ...
Loading ...
Loading ...