Loading ...
Loading ...
Loading ...
53
3-5 Link Aggregation
3-5.1 Port
This section describes that Port setting/status is used to configure the trunk property of each
and every port in the switch system.
Web Interface
To configure the trunk property of each and every port in the web interface:
1. Click Port Management, Link Aggregation and port.
2. Specify the Method, Group, LACP Role and LACP Timeout.
3. Click the apply to save the setting.
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 3-5.1: The trunk port setting/status
Parameter description :
Port :
The logical port for the settings contained in the same row.
Method :
This determines the method a port uses to aggregate with other ports.
None :
A port does not want to aggregate with any other port should choose this default
setting.
LACP :
A port use LACP as its trunk method to get aggregated with other ports also using
LACP.
Static :
A port use Static Trunk as its trunk method to get aggregated with other ports also
using Static Trunk.
Group :
Loading ...
Loading ...
Loading ...