Loading ...
Loading ...
Loading ...
59
3-5.4 LACP System Priority
It is used to set the priority part of the LACP system ID. LACP will only aggregate together the
ports whose peer link partners are all on a single system. Each system supports LACP will be
assigned a globally unique System Identifier for this purpose. A system ID is a 64-bit field
comprising a 48-bit MAC Address and 16-bit priority value. The System Priority can be set by the
user. Its range is from 1 to 65535. Default: 32768.
Web Interface
To configure the LACP System Priority in the web interface:
1. Click Port Management, Link Aggregation and LACP System Priority.
2. Specify the LACP System Priority.
3. Click the apply to save the setting.
4. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 3-5.4: The Lacp System Priority
Parameter description:
System Priority:
1-65535.
Show the System Priority part of a system ID.
Buttons
Apply :
Click to save changes.
Reset :
Click to undo any changes made locally and revert to previously saved values.
Loading ...
Loading ...
Loading ...