THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
32-Inch Propane Fire Pit Table
NP10618
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg
FR office: Saint Vigor d'Ymonville
PL office: Gdańsk
DANGER
FIRE OR EXPLOSION HAZARD
If you smell gas:
• Shut off gas to the appliance.
• Extinguish any open flame.
• lf odor continues, leave the area immediately.
• After leaving the area, call your professional or fire department.
Failure to follow these instructions could result in fire or explosion,
which could cause property damage, personal injury, or death.
For outdoor use only.
Installation and service must be performed by a qualified installer,
qualified technician, or the gas supplier.
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance. An LP-cylinder not
connected for use shall not be stored in the vicinity of this or any
other appliance.
WARNING
lmproper installation, adjustment, alteration, service or maintenance
can cause injury or property damage. Refer to the owner's
information manual provided with this appliance. For assistance or
additional information consult a qualified installer, qualified technician
or the gas supplier.
WARNING
If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury, or
loss of life.
WARNING
WARNING
INSTALLER:
Leave this manual with
the appliance.
CONSUMER:
Retain this manual for
future reference.
This appliance can produce carbon monoxide
which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space
such as a camper, tent, car or home.
DANGER
CARBON MONOXIDE HAZARD
Before you assemble or operate this unit, please carefully read this
entire manual. Failure to do so may result in a fire, explosion, injury
or death.
02 03
DANGER
FIRE OR EXPLOSION HAZARD
If you smell gas:
• Shut off gas to the appliance.
• Extinguish any open flame.
• lf odor continues, leave the area immediately.
• After leaving the area, call your professional or fire department.
Failure to follow these instructions could result in fire or explosion,
which could cause property damage, personal injury, or death.
For outdoor use only.
Installation and service must be performed by a qualified installer,
qualified technician, or the gas supplier.
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance. An LP-cylinder not
connected for use shall not be stored in the vicinity of this or any
other appliance.
WARNING
lmproper installation, adjustment, alteration, service or maintenance
can cause injury or property damage. Refer to the owner's
information manual provided with this appliance. For assistance or
additional information consult a qualified installer, qualified technician
or the gas supplier.
WARNING
If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury, or
loss of life.
WARNING
WARNING
INSTALLER:
Leave this manual with
the appliance.
CONSUMER:
Retain this manual for
future reference.
This appliance can produce carbon monoxide
which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space
such as a camper, tent, car or home.
DANGER
CARBON MONOXIDE HAZARD
Before you assemble or operate this unit, please carefully read this
entire manual. Failure to do so may result in a fire, explosion, injury
or death.
02 03
WARNING
• The installation of this unit must adhere to local codes or Propane
Storage and Handling Code, CSA B149.2.
• THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product
shall be used outdoors, in a ventilated space and shall not be used in
any enclosed area.
• This unit is to be used with propane gas only! (sold separately)
• Do not attach a remote gas supply to this unit.
• Only use propane gas for this unit.
• Solid fuels shall not be burned in this appliance.
• When igniting this unit, stay away from the burner as the flame will
light up and may cause injury.
● LP GAS WARNING: Do not use any more than 1/4in depth lava
rocks/pumice stones/LavaGlass
®
above the burner holes. Doing so
will suffocate the flame.
● If the propane gas tank is leaking gas, you may hear, see, or smell
a hiss. Do the following:
1. Disconnect the propane gas tank. 2. Do not attempt to fix the
problem yourself. 3. Contact professional or fire department for help.
● Applying too much propane may result in gas pooling and will not
burn. Allow fresh air into the unit so that the remaining gas may
escape.
● Do not use a flame to check for gas leaks.
● Manifold pressure: 11 inches w.c. (2.74kPa).
● Use LP propane tanks with the following dimensions: diameter 12
in, height 18 in - capacity 20 lbs.
● You must use a propane tank that has a collar to protect the gas
valve.
● DO NOT fill tank over 80 percent full.
● The tank system must be set up for vapor withdrawal.
● Discontinue use if any part of the propane tank is damaged. Rust
and dents may be hazardous and should be inspected by a gas
supplier.
● Do not burn anything other than the provided materials for this fire
table.
● Keep away from the unit for the first 20 minutes after igniting your
unit for the first time, as lava rocks/pumice stones/L avaGlass
®
could
pop out and cause injury. Should any rocks pop out, discard them.
● Always ensure that lava rocks/pumice stones/LavaGlass
®
are
completely dry before use. Failure to do so will cause them to crack
or pop.
● Do not operate unit until all parts are fully assembled.
● Do not paint or color any part of this heating unit.
● Unit may be hot while in use, do not attempt to move it while in
use.
● Never leave this heating unit unattended while in use.
● This unit is not intended for cooking.
● Keep any flammable items away and do not use any other fireplace
cover for this unit.
● Keep a safe distance to avoid burning skin or clothing.
● Do not sit or rest hands or feet on this heating unit.
● Never place hands or fingers on upper portion of this unit while in
use.
● Keep all electrical cords and fuel supply hose away from heated
surfaces.
● Combustible material should not be within 60 inches of the top of
the unit, or within 48 inches around the entire unit.
● Keep the appliance area clear and free from combustible material,
gasoline and other flammable vapors and liquids.
● If the flame goes out while burning, turn the gas valve off. Wait 5
minutes before repeating the initial lighting procedure. Once you
have a flame started, hold down the control knob for 1 minute.
● Do not add water into the unit.
04 05
WARNING
• The installation of this unit must adhere to local codes or Propane
Storage and Handling Code, CSA B149.2.
• THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product
shall be used outdoors, in a ventilated space and shall not be used in
any enclosed area.
• This unit is to be used with propane gas only! (sold separately)
• Do not attach a remote gas supply to this unit.
• Only use propane gas for this unit.
• Solid fuels shall not be burned in this appliance.
• When igniting this unit, stay away from the burner as the flame will
light up and may cause injury.
● LP GAS WARNING: Do not use any more than 1/4in depth lava
rocks/pumice stones/LavaGlass
®
above the burner holes. Doing so
will suffocate the flame.
● If the propane gas tank is leaking gas, you may hear, see, or smell
a hiss. Do the following:
1. Disconnect the propane gas tank. 2. Do not attempt to fix the
problem yourself. 3. Contact professional or fire department for help.
● Applying too much propane may result in gas pooling and will not
burn. Allow fresh air into the unit so that the remaining gas may
escape.
● Do not use a flame to check for gas leaks.
● Manifold pressure: 11 inches w.c. (2.74kPa).
● Use LP propane tanks with the following dimensions: diameter 12
in, height 18 in - capacity 20 lbs.
● You must use a propane tank that has a collar to protect the gas
valve.
● DO NOT fill tank over 80 percent full.
● The tank system must be set up for vapor withdrawal.
● Discontinue use if any part of the propane tank is damaged. Rust
and dents may be hazardous and should be inspected by a gas
supplier.
● Do not burn anything other than the provided materials for this fire
table.
● Keep away from the unit for the first 20 minutes after igniting your
unit for the first time, as lava rocks/pumice stones/L avaGlass
®
could
pop out and cause injury. Should any rocks pop out, discard them.
● Always ensure that lava rocks/pumice stones/LavaGlass
®
are
completely dry before use. Failure to do so will cause them to crack
or pop.
● Do not operate unit until all parts are fully assembled.
● Do not paint or color any part of this heating unit.
● Unit may be hot while in use, do not attempt to move it while in
use.
● Never leave this heating unit unattended while in use.
● This unit is not intended for cooking.
● Keep any flammable items away and do not use any other fireplace
cover for this unit.
● Keep a safe distance to avoid burning skin or clothing.
● Do not sit or rest hands or feet on this heating unit.
● Never place hands or fingers on upper portion of this unit while in
use.
● Keep all electrical cords and fuel supply hose away from heated
surfaces.
● Combustible material should not be within 60 inches of the top of
the unit, or within 48 inches around the entire unit.
● Keep the appliance area clear and free from combustible material,
gasoline and other flammable vapors and liquids.
● If the flame goes out while burning, turn the gas valve off. Wait 5
minutes before repeating the initial lighting procedure. Once you
have a flame started, hold down the control knob for 1 minute.
● Do not add water into the unit.
04 05
● Do not operate unit if any part has been under water. Immediately
call a qualified service technician to inspect the appliance and replace
any part of the control system and any gas control that has been
under water.
• Do not disconnect any part while unit is in use.
• Do not store a spare propane tank on or near this unit.
• If the heating unit is indoors, detach the propane tank and leave
outdoors.
● Do not operate on a boat or vehicle. This unit must be used on a
flat surface and outdoors ONLY.
● Always remove protective cover before operating (if applicable).
● Do not set the protective cover over the unit until it is turned off
and completely cooled down.
• Check for leaks after not using the unit for long periods of time.
• Children should never operate this unit. Children must be
supervised while near this unit.
• Keep gas tank at least 5 feet away from unit when lit. (if external
tank)
• Maximum gas supply: 250 psi; Min. gas supply: 10 psi.
● All installation and repair should be done by a qualified
professional. This unit should be inspected annually and cleaned
regularly.
● Inspect all elements of this heating unit before each use. If there is
damage, the burner must be replaced.
● Keep the hose out from any pathways to eliminate any accidental
damage. (if external tank)
● Be aware of the hazards of high temperatures and stay away from
the unit to avoid any burns or injury.
● The gas supply tank should be constructed and marked with the
specifications for the LP gas tanks of the U.S. Department of
Transportation or the National Standard of Canada CAN/CSA- B339,
LP gas tanks, spheres and tubes for Transportation of Dangerous
Goods.
● The LP gas tank must have a listed overfilling prevention device and
a QCCI or Type I, (CGA791) LP gas tank connection.
● This heating appliance should not be used on plastic or artificial
wood decks.
● Children and adults should be alerted to the hazards of high surface
temperatures and should stay away to avoid burns or clothing
ignition.
● Young children should be carefully supervised when they are in the
area of the appliance.
● Clothing or other flammable materials should not be hung from the
appliance or placed on or near the appliance.
● Any guard or other protective device removed for servicing the
appliance shall be replaced prior to operating the appliance.
● Installation and repair should be done by a qualified service person.
The appliance should be inspected before use and at least annually
by a qualified service person. More frequent cleaning may be required
as necessary. It is imperative that the control compartment, burners
and circulating airways of the appliance are kept clean.
IF APPLICABLE:
● Allow heating item to cool completely before placing on lid.
● DO NOT use heating item while lid is installed. Always remove the
lid while heating item is in use.
Only use the regulator and hose assembly provided with this unit.
Replacement parts must be supplied directly by the manufacturer.
Inspect the burner before use of this unit. If the burner shows any
kind of damage, do not operate the appliance. For assistance with
repair or replacement of the burner or any other parts, please contact
COSTWAY.
NOTE: You must follow all steps to properly assemble this heating
item. Make sure the gas valve is turned “OFF” before assembling.
Do NOT attempt to assemble without proper tools.
06 07
● Do not operate unit if any part has been under water. Immediately
call a qualified service technician to inspect the appliance and replace
any part of the control system and any gas control that has been
under water.
• Do not disconnect any part while unit is in use.
• Do not store a spare propane tank on or near this unit.
• If the heating unit is indoors, detach the propane tank and leave
outdoors.
● Do not operate on a boat or vehicle. This unit must be used on a
flat surface and outdoors ONLY.
● Always remove protective cover before operating (if applicable).
● Do not set the protective cover over the unit until it is turned off
and completely cooled down.
• Check for leaks after not using the unit for long periods of time.
• Children should never operate this unit. Children must be
supervised while near this unit.
• Keep gas tank at least 5 feet away from unit when lit. (if external
tank)
• Maximum gas supply: 250 psi; Min. gas supply: 10 psi.
● All installation and repair should be done by a qualified
professional. This unit should be inspected annually and cleaned
regularly.
● Inspect all elements of this heating unit before each use. If there is
damage, the burner must be replaced.
● Keep the hose out from any pathways to eliminate any accidental
damage. (if external tank)
● Be aware of the hazards of high temperatures and stay away from
the unit to avoid any burns or injury.
● The gas supply tank should be constructed and marked with the
specifications for the LP gas tanks of the U.S. Department of
Transportation or the National Standard of Canada CAN/CSA- B339,
LP gas tanks, spheres and tubes for Transportation of Dangerous
Goods.
● The LP gas tank must have a listed overfilling prevention device and
a QCCI or Type I, (CGA791) LP gas tank connection.
● This heating appliance should not be used on plastic or artificial
wood decks.
● Children and adults should be alerted to the hazards of high surface
temperatures and should stay away to avoid burns or clothing
ignition.
● Young children should be carefully supervised when they are in the
area of the appliance.
● Clothing or other flammable materials should not be hung from the
appliance or placed on or near the appliance.
● Any guard or other protective device removed for servicing the
appliance shall be replaced prior to operating the appliance.
● Installation and repair should be done by a qualified service person.
The appliance should be inspected before use and at least annually
by a qualified service person. More frequent cleaning may be required
as necessary. It is imperative that the control compartment, burners
and circulating airways of the appliance are kept clean.
IF APPLICABLE:
● Allow heating item to cool completely before placing on lid.
● DO NOT use heating item while lid is installed. Always remove the
lid while heating item is in use.
Only use the regulator and hose assembly provided with this unit.
Replacement parts must be supplied directly by the manufacturer.
Inspect the burner before use of this unit. If the burner shows any
kind of damage, do not operate the appliance. For assistance with
repair or replacement of the burner or any other parts, please contact
COSTWAY.
NOTE: You must follow all steps to properly assemble this heating
item. Make sure the gas valve is turned “OFF” before assembling.
Do NOT attempt to assemble without proper tools.
06 07
Min. Clearance
48 in. (121.9 cm)
Min. Clearance
60 in. (152.4 cm)
Min. Clearance
48 in. (121.9 cm)
Metal Stand
Control Knob
Glass panel
Protective
Cover
Combustible materials should not be within 60 inches of the
top of the unit, or within 48 inches around the entire unit.
Table Leg
A x1
Table Leg
B x1
Table Leg
C x1
E x2
Table Leg
D x1
Panel
G x1
Panel
H x1
Door
I x1 J x1
Table Lid
K x1
Fire Table
with Burner
L x1
M x1
lava rocks
N x9
Screw(M6*12MM)
O x1
Screwdriver
P x24
M6 Washer
Q x4
Screw(M6*25MM)
R x12
Screw(M6*35MM)
S x1
F x1
08 09
Min. Clearance
48 in. (121.9 cm)
Min. Clearance
60 in. (152.4 cm)
Min. Clearance
48 in. (121.9 cm)
Metal Stand
Control Knob
Glass panel
Protective
Cover
Combustible materials should not be within 60 inches of the
top of the unit, or within 48 inches around the entire unit.
Table Leg
A x1
Table Leg
B x1
Table Leg
C x1
E x2
Table Leg
D x1
Panel
G x1
Panel
H x1
Door
I x1 J x1
Table Lid
K x1
Fire Table
with Burner
L x1
M x1
lava rocks
N x9
Screw(M6*12MM)
O x1
Screwdriver
P x24
M6 Washer
Q x4
Screw(M6*25MM)
R x12
Screw(M6*35MM)
S x1
F x1
08 09
R x12
N x1
P x12
Attach the panels E,E,G to the legs A,B,C,D
using 12 pcs M6x35mm screws (R) and 12
pcs M6 washers (P).
Attach the metal stand (I) to the legs A,B,C,D
using 4 pcs M6x25mm screws (Q) and 4 pcs
M6 washers(P).
Attach the door (H) to the legs A,D
using 1 pc M6x12mm screw (N) .
C
B
E
A
H
G
D
D
E
N x8
P x8
Attach the fire table (K) to the legs A,B,C,D
using 8 pcs M6x12mm screws (N) and 8 pcs
M6 washers(P).
C
B
K
D
Do not lock the screws until the assembly is complete.
1
2 4
3
10 11
I
C
B
A
D
Q x4
P x4
A
R x12
N x1
P x12
Attach the panels E,E,G to the legs A,B,C,D
using 12 pcs M6x35mm screws (R) and 12
pcs M6 washers (P).
Attach the metal stand (I) to the legs A,B,C,D
using 4 pcs M6x25mm screws (Q) and 4 pcs
M6 washers(P).
Attach the door (H) to the legs A,D
using 1 pc M6x12mm screw (N) .
C
B
E
A
H
G
D
D
E
N x8
P x8
Attach the fire table (K) to the legs A,B,C,D
using 8 pcs M6x12mm screws (N) and 8 pcs
M6 washers(P).
C
B
K
D
Do not lock the screws until the assembly is complete.
1
2 4
3
10 11
I
C
B
A
D
Q x4
P x4
A
Turn the cylinder valve on the tank clockwise to close
the propane tank. Attach the preassembled regulator
from the fire table (K) to the cylinder valve by turning
the regulator coupling nut clockwise. Make sure it is
fastened securely and tighten connections by hand only.
Put the glass panel (F) to the fire table (K).
Chenc that the control knob(S) for the gas supply
system is turned to the “OFF” position before starting
any assembly,and put the lid (J).
Place propane gas tank (not included) into the
metal stand (I). Make sure the gas tank sits on the
metal stand (I) completely. Turn the preassembled
wing screw on the outer part of metal stand (I)
clockwise to secure the propane gas tank tightly.
I
EVLAV REDNILYC
PRESSURE
EVLAV FEILER
BLEED-OFF
VALVE
BLACK COUPLING NUT
REGULATOR
turn clockwise to connect
turn clockwise
to reseal
5
6
7
8
12 13
Turn the cylinder valve on the tank clockwise to close
the propane tank. Attach the preassembled regulator
from the fire table (K) to the cylinder valve by turning
the regulator coupling nut clockwise. Make sure it is
fastened securely and tighten connections by hand only.
Put the glass panel (F) to the fire table (K).
Chenc that the control knob(S) for the gas supply
system is turned to the “OFF” position before starting
any assembly,and put the lid (J).
Place propane gas tank (not included) into the
metal stand (I). Make sure the gas tank sits on the
metal stand (I) completely. Turn the preassembled
wing screw on the outer part of metal stand (I)
clockwise to secure the propane gas tank tightly.
I
EVLAV REDNILYC
PRESSURE
EVLAV FEILER
BLEED-OFF
VALVE
BLACK COUPLING NUT
REGULATOR
turn clockwise to connect
turn clockwise
to reseal
5
6
7
8
12 13
When the gas furnace products are not used outside,
should be covered with a protective cover(L), to
prevent the product for a long time under the sun
and rain caused iron oxidation.
M
.
CAUTION
M
lava
lava
9
10
Before performing a leak test, be sure that no sparks can occur and
you are in a spacious outdoor area. Connect the propane gas tank to
the regulator and turn the valve on the unit to the “off” position. Brush
a soap and water mixture on all connections. Turn the gas supply on;
if bubbles occur on any connection there may be a leak. If you smell
gas or a leak is discovered turn the gas valve off, disconnect propane
gas tank and do not use the appliance until the leak is repaired.
Do not use the heating unit without inspecting the gas hose. If there
are signs of wear or abrasion you must replace the hose (if
applicable). Pumice stones/lava rocks/LavaGlass® could pop up and
strike somebody’s face during the process of lighting this unit; stand
away from the unit for the first 20 minutes after igniting. Flame height
should be a yellow/blue color between 2 - 10 inches in height.
Wait 50 minutes after extinguishing flame prior to placing a lid (if
applicable) or protective cover on heating item.
1. Make sure the control knob is in the "OFF" position.
2. Open the door and slowly open the valve on the propane gas tank
by turning the knob counterclockwise.
3. Close the door on the body.
4. Push the ignition control knob in fully and rotate about 1/4 turn
counterclockwise until a click is heard, it may take several attempts
to light the burner. Once lit, keep holding down the control knob for
15 seconds.
5. If ignition doesn't occur within a few seconds, release the control
knob and rotate to the "OFF" position. Wait for 5 minutes for gas to
clear and then repeat the above lighting instructions.
6. To adjust the flame, turn the control knob either clockwise or
counterclockwise depending on whether you want to lower or raise
the flame.
To Light
14 15
When the gas furnace products are not used outside,
should be covered with a protective cover(L), to
prevent the product for a long time under the sun
and rain caused iron oxidation.
M
.
CAUTION
M
lava
lava
9
10
Before performing a leak test, be sure that no sparks can occur and
you are in a spacious outdoor area. Connect the propane gas tank to
the regulator and turn the valve on the unit to the “off” position. Brush
a soap and water mixture on all connections. Turn the gas supply on;
if bubbles occur on any connection there may be a leak. If you smell
gas or a leak is discovered turn the gas valve off, disconnect propane
gas tank and do not use the appliance until the leak is repaired.
Do not use the heating unit without inspecting the gas hose. If there
are signs of wear or abrasion you must replace the hose (if
applicable). Pumice stones/lava rocks/LavaGlass® could pop up and
strike somebody’s face during the process of lighting this unit; stand
away from the unit for the first 20 minutes after igniting. Flame height
should be a yellow/blue color between 2 - 10 inches in height.
Wait 50 minutes after extinguishing flame prior to placing a lid (if
applicable) or protective cover on heating item.
1. Make sure the control knob is in the "OFF" position.
2. Open the door and slowly open the valve on the propane gas tank
by turning the knob counterclockwise.
3. Close the door on the body.
4. Push the ignition control knob in fully and rotate about 1/4 turn
counterclockwise until a click is heard, it may take several attempts
to light the burner. Once lit, keep holding down the control knob for
15 seconds.
5. If ignition doesn't occur within a few seconds, release the control
knob and rotate to the "OFF" position. Wait for 5 minutes for gas to
clear and then repeat the above lighting instructions.
6. To adjust the flame, turn the control knob either clockwise or
counterclockwise depending on whether you want to lower or raise
the flame.
To Light
14 15
To Extinguish
1. Turn control knob clockwise to the "HIGH" position; push and
continue turning the control knob to the "OFF" position.
2. Close the cylinder valve on the propane gas tank if you don't intend
to use it for a long time.
• Before performing any maintenance always disconnect propane gas
tank.
• Store your product indoors during winter months. Avoiding extreme
cold temperatures will prevent exposure damage.
• Keep the heating item free and clear from combustible materials.
• Visually inspect burner for obstructions and keep tank enclosure
free and clear from debris.
• Use a soft brush to get rid of the mild stains, loose dirt and soil after
the burner and pumice stones/ lava rocks/LavaGlass® are completely
cooled down. Wipe down with a soft cloth.
• Harsh weather conditions may cause stubborn stains, discoloration
and possibly rust pitting.
• Permanent damage may occur if powder or solvent comes in contact
with painted or plastic components on this heating unit.
• Keep the heating unit stored away from direct sunlight.
• If storing this unit inside, disconnect the propane gas tank from the
gas valve.
• Not using manufacturer approved or supplied parts/accessories may
result in a defective condition and void the warranty of this heating
unit.
• Always place lid (if applicable) or protective cover on heating item
when not in use.
Problem
Heating
unit won’t
light
Burner
won’t light
while using
a match
Heating unit
emits a lot of
black smoke
Cause
Igniter pin and burner are wet
No gas flow
Gas flow is obstructed
Burner ports are clogged
Igniter battery is
incorrectly inserted
Regulator isn’t connected
securely to the tank
Check that the gas tank isn’t empty
Check all hoses for kinks and bends
Dry off with a soft cloth
Check that all burner ports are
free of any small lava
rocks/pumice
stones/LavaGlass
®
pieces
Igniter pin is broken
Straighten hose of all bends or kinks
Regulator hose is kinked
Flame is obstructed at
burner ports
Electrode wire is loose or
disconnected
Contact COSTWAY for a
replacement part
Electrode wire is shorting
between valve and igniter pin
Contact COSTWAY for a
replacement part.
Check which direction the
battery is inserted
Tighten regulator connection
to the gas tank
Reconnect wire to the igniter box
located inside the fire pit behind
the igniter box
Turn all gas flow connections off.
Insert an opened paperclip (or
similar item) into each of the
burner ports to clear them out.
Solution
16 17
To Extinguish
1. Turn control knob clockwise to the "HIGH" position; push and
continue turning the control knob to the "OFF" position.
2. Close the cylinder valve on the propane gas tank if you don't intend
to use it for a long time.
• Before performing any maintenance always disconnect propane gas
tank.
• Store your product indoors during winter months. Avoiding extreme
cold temperatures will prevent exposure damage.
• Keep the heating item free and clear from combustible materials.
• Visually inspect burner for obstructions and keep tank enclosure
free and clear from debris.
• Use a soft brush to get rid of the mild stains, loose dirt and soil after
the burner and pumice stones/ lava rocks/LavaGlass® are completely
cooled down. Wipe down with a soft cloth.
• Harsh weather conditions may cause stubborn stains, discoloration
and possibly rust pitting.
• Permanent damage may occur if powder or solvent comes in contact
with painted or plastic components on this heating unit.
• Keep the heating unit stored away from direct sunlight.
• If storing this unit inside, disconnect the propane gas tank from the
gas valve.
• Not using manufacturer approved or supplied parts/accessories may
result in a defective condition and void the warranty of this heating
unit.
• Always place lid (if applicable) or protective cover on heating item
when not in use.
Problem
Heating
unit won’t
light
Burner
won’t light
while using
a match
Heating unit
emits a lot of
black smoke
Cause
Igniter pin and burner are wet
No gas flow
Gas flow is obstructed
Burner ports are clogged
Igniter battery is
incorrectly inserted
Regulator isn’t connected
securely to the tank
Check that the gas tank isn’t empty
Check all hoses for kinks and bends
Dry off with a soft cloth
Check that all burner ports are
free of any small lava
rocks/pumice
stones/LavaGlass
®
pieces
Igniter pin is broken
Straighten hose of all bends or kinks
Regulator hose is kinked
Flame is obstructed at
burner ports
Electrode wire is loose or
disconnected
Contact COSTWAY for a
replacement part
Electrode wire is shorting
between valve and igniter pin
Contact COSTWAY for a
replacement part.
Check which direction the
battery is inserted
Tighten regulator connection
to the gas tank
Reconnect wire to the igniter box
located inside the fire pit behind
the igniter box
Turn all gas flow connections off.
Insert an opened paperclip (or
similar item) into each of the
burner ports to clear them out.
Solution
16 17
No gas flow
Flame
blows out
easily
Sudden
drop in gas
flow
See ‘sudden drop in gas
flow’ above
Turn the control knob to the
‘off’ position. Close the tank
valve and disconnect propane
gas tank. Turn the control knob
to ‘high’; wait 1 minute. Turn
the control knob back to the
‘off’ position. Reconnect
propane gas tank. Light the fire
unit as indicated in the ‘To
Light’ section of this manual.
Check that the gas tank isn’t
empty
Check that the gas tank isn’t
empty
No gas flow
Increase flame to ‘high’
High or gusting winds
Excess flow safety valve
has been activated
Excess flow safety valve
has been activated
18
No gas flow
Flame
blows out
easily
Sudden
drop in gas
flow
See ‘sudden drop in gas
flow’ above
Turn the control knob to the
‘off’ position. Close the tank
valve and disconnect propane
gas tank. Turn the control knob
to ‘high’; wait 1 minute. Turn
the control knob back to the
‘off’ position. Reconnect
propane gas tank. Light the fire
unit as indicated in the ‘To
Light’ section of this manual.
Check that the gas tank isn’t
empty
Check that the gas tank isn’t
empty
No gas flow
Increase flame to ‘high’
High or gusting winds
Excess flow safety valve
has been activated
Excess flow safety valve
has been activated
18
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
EN
DE
FR
ES
IT
PL
With your inspiring rating, COSTWAY will be more consistent to offer you EASY
SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
Mit Ihrer inspirierenden Bewertung wird COSTWAY konsistenter sein, um Ihnen EIN
SCHÖNES EINKAUFSERLEBNIS, GUTE PRODUKTE und EFFIZIENTEN SERVICE zu
bieten!
Avec votre évaluation inspirante, COSTWAY continuera à fournir une EXPÉRIENCE
D’ACHAT PRATIQUE, des PRODUITS DE QUALITÉ et un SERVICE EFFICACE !
Con su calificación inspiradora, COSTWAY será más consistente para ofrecerle
EXPERIENCIA DE COMPRA FÁCIL, BUENOS PRODUCTOS y SERVICIO EFICIENTE.
Con la tua valutazione incoraggiante, COSTWAY sarà più coerente per offrirti
ESPERIENZA DI ACQUISTO FACILE, BUONI PRODOTTI e SERVIZIO EFFICIENTE!
Dzięki twojej opinii COSTWAY będzie mógł oferować jeszcze WYGODNIEJSZE
ZAKUPY, LEPSZE PRODUKTY i SPRAWNIEJSZĄ OBSŁUGĘ KLIENTA.
32-Inch Propane Fire Pit Table
NP10618
USER’S MANUAL
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg
FR office: Saint Vigor d'Ymonville
PL office: Gdańsk
