Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION COMMERCIAL 22” LAWN MOWER — LMX5300SP/LMX5300SP-FC
11
SERVICE
WARNING:
Grass bag components, the discharge door, side discharge chute,
mulching insert, and trailing shield are subject to wear and damage, which could
expose moving parts or allow objects to be thrown and could increase the risk of
injury. For safety protection, frequently check all components and replace damaged
components immediately with identical EGO replacement parts.
◾
If the mower’s built-in overload protection switch frequently trips, contact EGO
Customer Service or your closest EGO service center.
◾
Do not wash the mower with a hose; avoid getting water in the motor and
electrical connections.
◾
Remove the battery and store the idle lawn mower in a covered area when not in
use. Allow the motor to cool before storing it in any enclosure. The lawn mower
should be stored in a dry, high, or locked-up enclosure, out of reach of children.
◾
When servicing, use only identical EGO replacement parts. Use of parts that do not
meet the original equipment specifications may lead to improper performance and
compromised safety.
◾
Remove or disconnect the battery pack before servicing, cleaning, or removing
material from the lawn mower.
◾
Follow instructions for lubricating and changing accessories.
◾
Keep handles dry, clean and free from oil and grease.
◾
To reduce a fire hazard, keep the motor cover free of grass, leaves and debris
buildup.
◾
Check the blade bolts at frequent intervals for proper tightness. Also, visually
inspect the blade for damage (e.g., bending, cracking and wear.). Replace
the blade only with the identical EGO replacement blade, as listed in section
“RECOMMENDED ACCESSORIES” in this manual.
◾
Maintain your mower with care – keep the mower blade sharp and clean for the
best and safest performance. Mower blades are sharp and can cut. Wrap the blade
or wear gloves and use extra caution when servicing it.
◾
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working
condition.
◾
Never remove or tamper with safety devices. Regularly check their proper
operation. Never do anything to interfere with the intended function of a safety
device or to reduce the protection provided by a safety device.
Loading ...
Loading ...
Loading ...