Loading ...
Loading ...
Loading ...
8. Allow engine to warm for 1-2 minutes before using the product.
Page 29
7. Slowly push the choke lever in as the engine
warms. If the engine falters, pull the choke out until
the engine has warmed up.
NOTICE
Allowing the tank to empty with the engine running will damage the pump. Damage
caused by running the pump without water is not covered under warranty. To avoid this
hazard always turn o the engine before the tank is exhausted of water.
PUMP DAMAGE
SHUTTING OFF THE ENGINE
2. Slide the throttle to the SLOW position (if equipped).
3. Turn the engine switch to the OFF position.
4. Slide the fuel valve to the OFF position (if equipped).
8. Allow the engine to cool completely before maintenance or refueling.
1. Set the trigger lock on the spray gun.
5. Release the trigger lock then squeeze the spray gun trigger to relieve the pressure in
the hose and pump. Disconnect the gun from the high-pressure hose; store it properly
before moving the trailer.
7. Respool the high-pressure hose onto the hose reel.
6. Rotate the tank valve to CLOSED.
Loading ...
Loading ...
Loading ...