Loading ...
Loading ...
Loading ...
Once the tank is lled, turn the water supply o then disconnect the water supply hose.
4.
DO NOT move the trailer unless the water supply hose is disconnected! Damage to
the tank ller hose, the water supply hose and the water system hose bib will occur.
Page 16
A pressure washer pump is designed to operate with water owing through it. Water lubricates
and cools the internal components of the pump. Running a pressure washer pump without
water will severely damage the pump seals and other internal components. Damage caused
by running a pressure washer pump without water is not covered under warranty.
CONNECTING THE SPRAY GUN
NOTICE
Running a pressure washer pump without water will severely damage the pump seals
and other internal components. To avoid this hazard, make sure the water tank is lled
with enough water for the application. Never allow the tank to be pumped dry, severe
pump damage will occur.
PUMP PURGING
WARNING:WARNING:
The high pressures created by a pressure washer can cause uid injection injuries,
severe lacerations, amputations, and / or death. To avoid these hazards, always aim
the spray gun and lance in a safe direction when using the pressure washer and never
attempt to touch a leak in a high-pressure hose or tting.
INJECTION INJURY
Engage the trigger lock.2.
Spray gun trigger
Spray gun trigger lock
While pulling back on the high-pressure hose outlet collar, insert the spray gun
connector then release the collar. Gently tug on the hose to make sure it is locked.
1.
Loading ...
Loading ...
Loading ...