Loading ...
Loading ...
Loading ...
Nozzle placement
Remove the colored quick-connect nozzles from
the plastic bag and insert them into the rubber
grommets next to their corresponding color on
the label.
Page 10
BATTERY CONNECTIONS
(If equipped)
The pressure washer does not come with a battery. You must install a U1 sized battery
before using the pressure washer (if applicable).
1. Remove the cover from the battery box.
2. Carefully place the battery into the battery box.
3. Place the red, positive (+) battery cable onto
the positive (+) battery post. Tighten.
4. Place the black, negative (-) battery cable
onto the negative (-) battery post. Tighten.
5. Place the cover back onto the battery box.
WARNING! Always remove the black, negative (-) battery cable rst and always
connect the black, negative (-) battery cable last.
RISK OF ACID BURNS
DANGER:DANGER:
WARNING:WARNING:
Attempting to start the engine incorrectly or using the pressure washer incorrectly can
result in engine and/or pressure washer damage, and may cause serious injury or death.
To avoid these hazards, be sure to read, understand, and follow the steps outlined in the
OPERATING CHECKLIST section of the owner’s manual before starting the engine, and
follow all the guidelines for proper use of the pressure washer.
OPERATING CHECKLIST
Loading ...
Loading ...
Loading ...