Loading ...
Loading ...
Loading ...
OPERATIONAL INSTRUCTIONS
14
HANDLEBAR ANGLE ADJUSTMENT
Refer to the illustrations below. The angle of the HANDLEBARS(118) can be set to different angles
from Position 1 to Position 5. Lift the LEVER(9) up using your right foot, adjust the UPRIGHT(3)/
HANDLEBARS(118) to desired position. Then press the LEVER(9) down to lock the UPRIGHT(3)/
HANDLEBARS(118) in position.
3
4
2
5
Position Index
(
Shown 1 to 5
)
1
SEAT ADJUSTMENT
1. Turn the ADJUSTMENT KNOB(99) counterclockwise
to loosen, but not remove, then pull the ADJUSTMENT
KNOB(99) to release the pin. Slide the SEAT FRAME(5)
until the SEAT(26) is at the proper height. Release the
ADJUSTMENT KNOB(99) making sure the pin catches in
one of the holes of the SEAT FRAME(5) and tighten the
ADJUSTMENT KNOB(99).
Proper seat adjustment is important.
1. Do not attempt to adjust the seat while you
are on the STAMINA® Recumbent Exercise
Bike.
2. Always tighten the ADJUSTMENT KNOB(99)
after adjusting the seat to a new position.
2. Sit on the seat and place your feet on the pedals. You should
be able to move through a complete pedal stroke without
locking your knees or shifting your hips on the seat. The seat
is too close to the pedals if you have more than a slight bend
in your knees at the bottom of the pedal stroke. The seat is
too far from the pedals if you have to completely straighten
your knees at the bottom of the pedal stroke. Refer to the
illustration.
CAUTION:
Loading ...
Loading ...
Loading ...