Loading ...
Loading ...
Loading ...
OPERATIONAL INSTRUCTIONS
12
In the setting mode, press to set target values. Press the button
and hold it down for two seconds, the meter will continue to add
the values even without pressing the SET button. Press any
button to stop.
USING THE FITNESS METER
POWER OFF: Automatically shuts o after 4 minutes of inactivity.
POWER ON:
FUNCTIONS:
FUNCTION BUTTONS :
MODE /
RESET
:
In the setting mode, press and release to select each function
for preset target values for TIME, DISTANCE, and CALORIES.
Press and release to select functions for display for DISTANCE,
CALORIES, RPM, and ODOMETER.
Press the button and hold it down for two seconds to reset all
functions to zero.
Press to display the function values of moving the handlebar.
HAND:
Move the handlebar, begin pedaling, or press any button.
PRESET VALUES OPERATION:
You can move the handlebar or begin pedaling to power on the meter. This will start the operation of the meter. Or,
you can preset the function values for counting down. Stop pedaling for four seconds, the meter will enter setting
mode. The meter will go through the input items as follows and allow you to set the function values. Use SET button
to input the values. Press the MODE/RESET button to conrm. Or, just press the MODE/RESET button to skip the
setting and move on to the next function. If you go past the value of any function, you will just can press the MODE/
RESET button and hold it down for two seconds to reset all preseted functions to zero, and then preset all functions
again. After all of the desired settings are chosen, move the handlebar and/or begin pedaling to start the workout.
Time (1:00 to 99:00) Distance (0.1 to 99.9 mile) Calories (1.0 to 999 Kcal)
1. You may preset values for several functions. The preset function values will start to count down. When
you complete one of the preset functions, the meter will remind you with an audible alarm for eight
seconds. Then the value of this completed function will start to count up, while the other preset functions
will continue to count down.
2. The meter will shut o automatically after 4 minutes of inactivity. All function values will be kept. Press
the MODE/RESET button and hold it down for two seconds to reset all functions to zero.
SET :
Indicates the meter is working to show the function values of handlebar moving.
Indicates the meter is working to show the function values of pedaling.
Displays the current speed from zero to 99.9 miles per hour.
Displays the time from 1 sec. up to 99:59 minutes. Counts down from preset value.
Automatically scans each function of DISTANCE, CALORIES, RPM, and ODOMETER in sequence
changing every six seconds.
Displays distance from zero to 99.99 Miles. Counts down from preset value.
Displays the calories burned from zero to 999 Kcal. Counts down from preset value.
The calorie readout is an estimate for an average user. It should be used only as a comparison
between workouts on this unit.
Displays handlebar or crank RPM (revolutions per minute), from zero to 999 rpm.
Displays the total accumulated distance you have taken from zero to 9999 miles. The total
accumulated distance is retained when the meter is turned o, until the batteries are removed.
HAND:
FOOT
:
SPEED:
TIME:
SCAN:
DISTANCE:
CALORIES:
RPM:
ODOMETER:
Speed
Hand
Distance
Calories
RPM
ODO
MODE
SET
Foot
Time
SET
FOOT
HAND
RESET
Press to display the function values of pedaling. FOOT :
NOTE: The meter is designed to show the function values of HAND and FOOT separate, except the TIME. The
Time function will show when both the handlebar and pedaling are moving together.
ENTER SETTING MODE:
Stop pedaling for four seconds to enter setting mode.
NOTE:
Loading ...
Loading ...
Loading ...