Loading ...
Loading ...
Loading ...
Connection to Circuits
1-Phase Measurement 5
5-7
Note
In Figures 5-3, 5-6, and 5-9, Fluke recommends using MCS measuring
leads for triaxial shunts and MCP leads for planar shunts. Triaxial shunts
are equipped with guard connectors in the plugs and planar shunts are
equipped with guard sockets.
Measurement with Voltage and Current Transducer
Figure 5-4 shows the connections for measurements with a voltage and current
transducer.
W Caution
To prevent damage to the transducer due to overload, check
transducer rating.
Note
Transducer errors limit the measuring bandwidth and reduce the intrinsic
uncertainty.
XW Warning
To avoid possible electric shock or personal injury:
• Risk of injury when touching connections, internal circuits,
and measuring devices that are not connected to earth
ground.
• Always adhere to the instructions regarding the sequence of
connection (see Chapter 5, “Connecting Sequence”).
HI
VOLTAGE
1000 V max
LO
PROBE
EXT.SHUNT
10 V max
123
HI
CURRENT
10 A max
LO
ALL INPUTS MAX 1000V CATII TO
PROBE
EXT.SHUNT
10 V max
HI
CURRENT
10 A max
LO
HI
VOLTAGE
1000 V max
LO
S
1
A
a
n
N
N
L1
S
2
P
1
P
2
V
Max. 10 m
Load
esn011.eps
Figure 5-4. Voltage and Current Transducer Measurement
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...