Loading ...
Loading ...
Loading ...
13
Environmental Protection Description
Notes:
• Before removing the battery, make sure it is fully drained. Do not attempt to remove the battery if the robot is connected to the dock.
• When unpluging the circuit board cable, avoid positive electrodes touching with negative ones to prevent causing short circuits.
• Remove the entire battery pack. Avoid damaging the battery pack casing to avoid short-circuits or leakage of hazardous substances.
• In the event of accidental contact with battery fluid, rinse thoroughly with water and seek immediate medical care.
The chemical substances contained in the built-in lithium-ion battery of this product can cause environmental pollution. Remove the battery before
disposing of this product and hand it to a professional battery recycling facility for centralized disposal.
1. Rotate the main unit cover to remove the cover.
2. Unplug the circuit board cable to remove the circuit board.
3. Remove the battery.
How to remove the battery:
* The following information applies only when disposing of the robot and should not be followed for day-to-day operations.
Removing the Battery
Holiday Energy Saving Function
In holiday mode the device will switch to Low Power mode to minimize power consumption. This includes dimming of the LED indicator, and the
stopping of all non-charging related functions including cleaning, remote control over WiFi, and more.
To activate holiday mode, firstly, remove the wet and dry vacuum cleaner from the charging dock and turn it off. Secondly, press and hold the Change
Mode button and at the same time, put the vacuum back to the dock and wait 10 seconds until hear “ticktack” then release the button. The wet and dry
vacuum cleaner, main unit and charging dock will enter holiday mode.
To deactivate holiday mode, you need two steps:
1. Remove the wet and dry vacuum cleaner from the charging dock and press and hold the Power button for 10 seconds.
2. Unplug the power cable and reconnect.
Loading ...
Loading ...
Loading ...