Loading ...
Loading ...
Loading ...
09
Switching Modes
Press the button to switch to AUTO, MAX,
Floor Drying or ECO mode. The screen will
display the icon for the current mode.
CautionC4-1—
In order to prevent dirty water from
leaking out, do not lay the body flat or
tilt it over 60° when dirty tank in place.
Standby and Power Off
Note: Floor Drying mode is for removing clean water from
wet environments such as bathrooms. It should not be used
when water depth exceeds 10 mm (0.4 in).
1. When the vacuum cleaner is operating, press
the
button to pause it and enter standby
mode.
2. In standby mode, you can lock the cleaning
head and place the vacuum cleaner upright
on the floor.
Adding and Emptying Water
When the dirty tank is full or the clean tank
is empty during use, the vacuum cleaner will
provide audio and visual alerts. Add water into
the clean tank or empty the dirty tank before
continuing.
You can modify the settings in the app to enable
automatically resume operation after unlocking the cleaning
head.
Note:
C5
Emptying the Dirty Tank
Push the dirty tank release button and
remove the tank.
C5-1—
Hold the handle firmly with one hand,
gently lift out the cover, and then pour
out the dirty water.
Reinstall the cover, tilt the dirty tank,
install the bottom in place, and then
gently push it inward to secure it in place.
C5-2—
C5-3—
Charging and Self-Cleaning
1. Lock the cleaning head, and place the vacuum
cleaner onto the charging dock. The voice alert
“Charging” indicates that the vacuum cleaner
is charging.
2. Press the
button to start standard self-
cleaning. Press and hold the button for 2
seconds to switch to DEEP self-cleaning mode.
3. After self-cleaning finishes, empty the dirty tank
to prevent odors.
Notes:
• The product is equipped with a built-in high-performance
lithium-ion rechargeable battery pack. To maintain battery
performance, keep the product charged for normal use.
• Always place the vacuum cleaner on the charging dock after
use to prevent water stains.
Drying
Voice Alert Settings
Drying starts automatically after self-cleaning
is completed. To manually start or stop drying,
press the
button on the docked vacuum
cleaner.
Connect to the app to adjust the volume of
voice alerts.
3. Lock the cleaning head and press and hold
the
button for 2 seconds to turn off the
vacuum cleaner. If the vacuum cleaner is left
idle for 5 minutes in standby mode, it will
automatically turn off.
Instructions for Using
the Vacuum Cleaner
D
Powering On and Off
Press the button to start the vacuum cleaner
and press it again to pause the vacuum cleaner.
Press and hold the button for 2 seconds to
turn the vacuum cleaner off.
Switching Modes
Press the button to switch between AUTO
and MAX modes. The screen will display the
icon for the current mode.
D1
Selecting a Cleaning Head
Motorized Mini-Brush
Multi-Surface Brush
Crevice Tool
Dusting Brush
D1-1—
D1-2—
D1-3—
D1-4—
Motorized Mini-Brush: To remove dust from
soft nap mattress pads or sofas.
Multi-Surface Brush: To remove dust from low
and medium pile carpets. It can also be used
on tiles or other floor surfaces.
2-in-1 cleaning head (crevice tool ): To remove
dust from gaps in door frames.
2-in-1 cleaning head (dusting brush): To
remove dust from tables or fabric.
Switching between the crevice tool and dusting
brush: Press the lock catch at the bottom of
the 2-in-1 cleaning head, and pull the head
downward until it clicks in place. The cleaning
head is switched to a dusting brush. Press
the lock catch and push the head upward to
Loading ...
Loading ...
Loading ...