MOTORCYCLE PORTABLE FUEL TANK 1L
MODEL NO: MS029.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING: DO NOT SMOKE OR USE A NAKED FLAME WHILE USING THIS ITEM. BE AWARE THAT PETROL VAPOUR IS
HEAVIER THAN AIR AND FORMS AN EXPLOSIVE MIXTURE.
WARNING! Ensure Health & Safety, local authority and general practice regulations are adhered to when using this equipment.
WARNING! Always wear approved eye protection and appropriate protective clothing including gloves.
8 DO NOT use to store fuel.
8 DO NOT use the tank for any other purpose than that for which is designed.
9 Ensure that the working area is well ventilated.
9 Check that the hose clips are tight before use.
9 Check the condition of the hose before use.
9 Ensurethatthehosedeliveryvalveisclosedbeforelling.
9 Fill with the minimum amount of petrol necessary for each engine test.
9 Ensure that the cap is secure.
9 Check the unit for leaks before use.
9 Any fuel spillage should be cleaned up immediately to avoid the risk of accidental ignition.
9 If fuel leakage is noticed at any time, abort the engine test, close the delivery valve and remove the tank to an open area.
9 Afteruse,drainthetankofpetrolintoanapprovedcontainer.Leavethecapoandthevalveopentoallowanyfuelresidueinthe
portable fuel tank to evaporate.
9 When dry and clear of vapour: store in a cool, dry, childproof location.
2. INTRODUCTION
Must have item when needing to remove fuel tank to perform motorcycle maintenance. Eliminates the need to balance fuel tank in an awkward
position. Simply remove your tank, connect the auxiliary fuel tank, which is gravity fed, and hang it up using the hook provided. Features 1L tank,
1500mmhose,twohoseclamps,twohoseclipsandon/otap.Fordualentrycarburettorsystems,usetheModelNo.MS029DCKFuelFeed
Lines. Suitable for E10 petrol.
3. SPECIFICATION
Tank Size: ..........................................................................1L
Hose Length:............................................................1500mm
MS029.V2Issue112/06/23
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear eye
protection
Wear protective
gloves
Wear safety
footwear
Wear protective
clothing
Highly
flammable
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
ourtechnicalteamontechnical@sealey.co.ukor01284757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
REGISTER YOUR
PURCHASE HERE
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
