Hoshizaki PT2AHSHS User Manual

Loading ...

4. Half Glass Door Reversal

Special Tools Required:

Wrench A: 1 - 11/16" (17 mm) Thin Open End Tappet Wrench

Wrench B: 1 - 5/16" (8 mm) Thin Open End Tappet Wrench

Note: Hinge brackets are universal and can be used in both left and right-hinged

applications.

Example shows change from right hinged to left hinged.

1) Lock the casters.

2) Remove the front panel, then being careful not to pull the wires on the control module

and door switch(es), remove the control panel. Secure the control panel so that it does

not interfere with the hinge brackets and will not fall. See Fig. 52.

3) At the center hinge, place wrench B on the tension rod and hold (prepare for tension

pressure), then using wrench A, loosen the lock nut. See Fig. 53.

4) Turn wrench B counter-clockwise to relieve tension on the tension rod. Without releasing

the pressure on wrench B and the tension rod, use wrench A to tighten the lock nut.

See Fig. 54

5) Grip wrench B in a new position on the tension rod and hold (prepare for tension

pressure), then using wrenchA, loosen the lock nut again.

6) Once loose, turn wrench B counter clockwise to relieve tension on the tension rod.

Repeat until all tension is released from the tension rod.

Fig. 53 Fig. 54

Fig. 52

Control Panel

Front Panel

Center Hinge

Bracket

Wrench A

Wrench B

Tension Rod

Lock Nut