Loading ...
Loading ...
Loading ...
12
E. Food Cart Ramp (Roll-In/Roll-Thru Appliances)
Conrm the area where the appliance is to be installed is at and level.
1) Place the appliance in position, then seal the perimeter where the appliance contacts
the oor with approved caulk compound in a smooth and easily cleanable manner.
See Fig. 9.
Food Cart Ramp
Truss Head Screws
Fig. 9
Body
Door
Door Hinge
Body
Door
Caulk Compound
Fig. 10
Fig. 11
Body
2) Remove the 2 ller screws from the bottom of the appliance. See Fig. 10. Next, loosen
the 4 truss head screws at the bottom of the appliance 3 to 4 mm (1/8"), then lay the
ramp onto the loosened truss head screws. See Fig. 10.
3) Seal around the ramp as shown in Fig. 11 with an approved caulk compound.
Caulk Compound
Caulk Compound
Filler Screws
Loading ...
Loading ...
Loading ...