Hikvision DS-K1T321EFX User Manual

Loading ...

Note

If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set

the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address

according to the door No.

Baud Rate

The baud rate when the devices are communicang via the RS-485 protocol.

Data Bit

The data bit when the devices are communicang via the RS-485 protocol.

Stop Bit

The stop bit when the devices are communicang via the RS-485 protocol.

Parity/Flow Ctrl/Communicaon Mode

Enabled by default.

8.4.9 Face Parameters Sengs

Set Face Parameters.

Face Parameters Sengs

Tap → Smart → Face Recognion Parameters .

Face An-spoong

Enable or disable the live face detecon funcon. If enabling the funcon, the device can

recognize whether the person is a live one or not.

Live Face Detecon Security Level

Aer enabling the face an-spoong funcon, you can set the matching security level when

performing live face authencaon.

1:1 Matching Threshold

Set the matching threshold when authencang via 1:1 matching mode. The larger the value,

the smaller the false accept rate and the larger the false rejecon rate.

1:N Matching Threshold

Set the matching threshold when authencang via 1:N matching mode. The larger the value,

the smaller the false accept rate and the larger the false rejecon rate. The maximum value is

100.

Face Recognion Timeout Value (s)

Congure the meout period for face recognion. If the face recognion me exceeds the

congured value, the device will prompt the face recognion meout.

DS-K1T321 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T321EFX Value Series Face Access Terminal