Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/51429126-ds-k1t321efx/bg28.png)
1.
Select System Sengs → Comm. (Communicaon) to enter the Communicaon sengs page.
2.
On the Communicaon sengs page, select Wi-Fi.
Figure 7-3 Wi-Fi Sengs
3.
Enable the Wi-Fi funcon.
4.
Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.
Note
Only digits, leers, and special characters are allowed in the password.
5.
Set the Wi-Fi's parameters.
-
By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the
gateway automacally.
-
If disable DHCP, you should enter the IP address, the subnet mask, and the gateway manually.
6.
Press OK to save the sengs and go back to the Wi-Fi tab.
7.
Press ESC to save the network parameters.
7.2.3 Set ISUP Parameters
Set ISUP parameters and the device can upload data via ISUP protocol.
Before You Start
Make sure your device has connect to a network.
Steps
1.
Select System Sengs → Comm. → ISUP .
DS-K1T321 Series Face Recognion Terminal User Manual
26
Loading ...
Loading ...
Loading ...