Loading ...
Loading ...
Loading ...
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default sengs.
Factory Defaults
Restore all parameters to the factory default sengs.
Restore to Inacve
Restore the recorder to inacve status.
Note
The recorder will reboot automacally aer restoring to the default sengs.
16.11 Schedule Reboot
The device will automacally restart according to the schedule.
Steps
1. Go to Maintenance → System Service → System Service → Schedule Reboot .
2. Check Enable.
3. Set the reboot schedule.
4. Click Apply.
16.12 Security Management
16.12.1 Congure ONVIF
ONVIF protocol allows the connecon with third-party cameras. The added user accounts have the
permission to connect other devices via ONVIF protocol.
Steps
1. Go to Maintenance → System Service → ONVIF .
2. Check Enable ONVIF to enable the ONVIF access management.
Note
ONVIF protocol is disabled by default.
3. Click Add.
4. Enter User Name, and Password
Network Video Recorder User Manual
152
Loading ...
Loading ...
Loading ...