Loading ...
Loading ...
Loading ...
21
ENGLISH
CAUTION!
Do not touch the metal surface
with bare hands. Risk of injury.
Wear protective gloves. Clean
carefully to avoid damaging
the metal surface.
12.4 Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap
detergent to clean the inner surface
of the drum and drum lifters. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use abrasive materials
or steel wool to clean the
drum.
12.5 Cleaning the control
panel and housing
Use a standard neutral soap
detergent to clean the control panel
and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture cleaning
agents or cleaning agents
which can cause corrosion.
12.6 Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 Error Codes
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the table). If the problem
persists, contact the Authorized Service Center.
WARNING!
Deactivate the appliance before carrying out any check.
In case of major problems, the acoustic signals operate, the display shows
an error code and the Start/Pause button may flash continuously:
Error
code
Possible cause Remedy
E91 Internal fail. No
communication
between electronic
elements of the
appliance.
The program was not finished properly or
the appliance stopped too early. Switch
the appliance off and on again. If the
error code appears again, contact the
Authorized Service Center.
EH0 The mains supply is
unstable.
When the appliance is showing EH0,
please wait until main supply is stable
than press start. If the appliance pause the
cycle without any indication then press the
cycle start. If the warning will occur check
the power cord /socket integrity or main
supply.
Loading ...
Loading ...
Loading ...