Loading ...
Loading ...
Loading ...
15
ENGLISH
Deactivating the water
container indicator:
1. Press the on/off button to activate
the appliance.
2. Wait approximately 8 seconds.
3. Press and hold touch buttons (A)
and (C) at the same time.
The display shows one of these 2
configurations:
• The display shows “Off”. After 5
s the display returns to normal
mode.
• The display shows “On”. After 5
s the display returns to normal
mode.
8.4 Adjustment of default
dryness setting
Every time you enter in the
“Adjustment of default dryness
setting” mode, previously set
degree of remaining moisture
will change into next value
( e.g previously set will
change into ).
To change the default degree of
remaining moisture:
1. Press the on/off button to activate
the appliance.
2. Use the program knob to set any
program.
3. Wait approximately 8 seconds.
4. Press and hold buttons (E) and (D)
at the same time.
One of these indicators comes on:
• the maximum dryness
• the more dry laundry
• the standard dry laundry
5. Press and hold buttons (E) and
(D) again until the indicator of the
correct level comes on.
If the display returns to the
normal mode (the time of the
selected program from step
2. will be displayed), while
setting the degree of remaining
moisture, press and hold
buttons (E) and (D) once again
to enter to the “Adjustment of
remaining laundry moisture”
mode (previously set degree of
remaining moisture will change
into next value).
6. After 5 s the display returns to
normal mode.
8.5 Buzzer on/off
This setting permits you to either
enable or disable the buzzer at the
end of the program. As an example,
you might wish to disable this buzzer
when you start a wash when going to
bed, so that when the drying finished
approximately 1 hour later, it will not
disturb you through the night.
Error warning beeps such as
critical faults are not disabled.
• To disable the buzzer sound,
press
and hold for approximately 2
seconds touch buttons (E) and (F)
at the same time, the icon “ ”
will show on display along with
buzzer sound.
• To return to default configuration
press these 2
touch buttons and
hold approximately 2 seconds, the
icon “ ” will show on display
along with buzzer sound.
Loading ...
Loading ...
Loading ...