Loading ...
Loading ...
Loading ...
16 www.westinghouse.com.au / www.westinghouse.co.nz
10. DAILY USE
10.1 Start a program without
delay start
1. Prepare the laundry and load the
appliance.
CAUTION!
Make sure that when you close
the door, the laundry does
not get caught between the
appliance door and the rubber
seal.
2. Press the on/off button to activate
the appliance.
3. Set the correct program and
options for the type of load.
The display shows the program
duration.
Real drying time will depend
on type of the load (quantity
and composition), the room
temperature and the humidity
of your laundry after spin
drying phase.
9. BEFORE FIRST USE
Rear drum packaging is
removed automatically when
dryer is activated for the first
time. Possible to hear some
noise.
To unlock the rear drum locks:
1. Switch on the appliance.
2. Set any program.
3. Press the Start/Pause button.
Drum starts to rotate. Rear drum
locks are automatically deactivated.
Before you use the appliance to dry
items:
• Clean the tumble dryer drum with
a moist cloth.
• Start a 1 hour program with moist
laundry.
At the beginning of the drying
cycle (first 3-5 min) there
could be a slightly higher
sound level. This is due to
the compressor starting up.
This is normal for compressor
powered appliances such as
refrigerators and freezers.
4. Press the Start/Pause touch
button. The program starts.
10.2 Starting the program
with delay start
1. Set the correct program and
options for the type of load.
2. Press the delay start button again
and again until the display shows
the delay time you want to set.
You can delay the start of a
program from a minimum of
30 minutes to a maximum of
20 hours.
3. Press the Start/Pause touch
button.
The display shows the countdown of
the delay start.
When the countdown is completed,
the program starts.
10.3 Change a program
1. Press the on/off button to
deactivate appliance
2. Press the on/off button to activate
the appliance.
3. Set the program.
Loading ...
Loading ...
Loading ...