Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
37
4) Select No. 2 to No. 4, and repeat the steps above to save the site position
information.
5. Set the zoom ratio.
1) Enter Remote Configuration->Smart Linkage Tracking interface.
2) Adjust the zoom ratio of speed dome until the live view of speed dome is
mostly the same with the view of target frame of camera.
6. Click Save. The calibration is completed when Calibration Succeeded shows.
6.2.2 Set Auto Calibration
Before you start:
Make sure that the initial scenes of bullet camera and PTZ camera are same.
Select the resolution of PTZ camera as 1920 × 1080, and select the VCA resource
type of bullet camera as Behavior Analysis.
Steps:
1. In the Calibration tab, select Auto Calibrating.
2. Click Save when Calibration Succeeded shows.
6.3 Calibration Veryfication
Purpose:
Test the Smart Linkage tracking effect to verify the calibration accuracy.
Steps:
1. Exit the remote configuration interface of the camera to enter the live view
interface.
2. Right-click on the live view window of camera to show the menu and click Smart
Linkage.
Loading ...
Loading ...
Loading ...