Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
27
Figure 4-7 Modify the IP Address
6. Input the password and click Save to activate your IP address modification.
4.2 Set the Network Camera over the WAN
Purpose:
This section explains how to connect the camera dome to the WAN with a static IP or
a dynamic IP.
4.2.1 Static IP Connection
Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.
Connect the Network Camera via a Router
Steps:
1. Connect the network camera to the router.
2. Assign a LAN IP address, the subnet mask and the gateway.
3. Save the static IP in the router.
4. Set port mapping, E.g., 80, 8000 and 554 ports. The steps for port mapping vary
depending on different routers. Please call the router manufacturer for assistance
with port mapping.
5. Visit the network camera through a web browser or the client software over the
internet.
Loading ...
Loading ...
Loading ...