Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
8
Lens (focal length)
7mm
10mm
15mm
25mm
35mm
50mm
75mm
Detection range (Vehicles)
631m
902m
1353m
2255m
3157m
4510m
6765m
Detection range (Humans)
206m
294m
441m
735m
1029m
1471m
2206m
Recognition range (Vehicles)
158m
225m
338m
564m
789m
1127m
1691m
Recognition range (Humans)
51m
74m
110m
184m
257m
368m
551m
Identification range (Vehicles)
79m
113m
169m
282m
395m
564m
846m
Identification range (Humans)
26m
37m
55m
92m
129m
184m
276m
This table is for reference only, and the actual detection range may vary according
to different camera settings, mounting condition, monitor and so on.
3.1.2 Memory Card Installation
Before you start:
Install microSD card to the bullet camera, and install microSD card to the speed
dome. To ensure the air impermeability, seal the memory card slot following the
same procedure you opened it.
Purpose:
Install the memory card into the camera, and you can save the recordings and
snapshots in the card. If you do not need saving videos in the memory card, skip this
step.
Bullet Camera Memory Card Installation
Steps:
1. Use the screw driver to open the memory card slot beneath the device.
Figure 3-2 Open the Memory Card Slot
2. Insert the microSD card into the memory card slot and make sure the chip faces
toward the lens. When it clicks, the card is properly installed.
Loading ...
Loading ...
Loading ...