Loading ...
Loading ...
Loading ...
Before You Start
Connect the device and computer or terminal with RS-485 cable.
Steps
1.
Go to Conguraon → System → System Sengs → RS-485 .
2.
Set the RS-485 parameters.
Note
You should keep the parameters of the device and the computer or terminal all the same.
3.
Click Save.
9.14 Set RS-232
RS-232 can be used to debug device or access peripheral device. RS-232 can realize communicaon
between the device and computer or terminal when the communicaon distance is short.
Before You Start
Connect the device to computer or terminal with RS-232 cable.
Steps
1.
Go to Conguraon → System → System Sengs → RS-232 .
2.
Set RS-232 parameters to match the device with computer or terminal.
3.
Click Save.
9.15 Locaon Sengs
Locaon displays and uploads the current longitude and latude of the device.
Auto Uploading
Check Enable and set Locaon Upload Interval.
The device will upload its locaon at the set interval. You can also click Refresh to upgrade the
device locaon manually.
Network Camera User Manual
74
Loading ...
Loading ...
Loading ...