Loading ...
Loading ...
Loading ...
4.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5.
Click Save.
Note
The funcon varies according to dierent models.
6.2.3 Set Face Detecon
It helps to detect the face in the detecon region. If a face is detected, the device triggers the
linkage acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Face Detecon .
2.
Check Enable Face Detecon.
3.
Oponal: Highlight to display the face in the image.
1) Check Enable Dynamic Analysis For Face Detecon.
2) Go to Conguraon → Local , set Rules to Enable.
4.
Set Sensivity. The lower the sensivity is, the prole of the face or unclear face is more dicult
to detect.
5.
Set the arming schedule and linkage methods. For the informaon about arming schedule
sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage
Method Sengs .
6.
Click Save.
6.2.4 Set Intrusion Detecon
It is used to detect objects entering and loitering in a pre-dened virtual region. If it occurs, the
device can take linkage acons.
Before You Start
Go to VCA → VCA Resource , and select Smart Event.
Steps
1.
Go to VCA → Smart Event → Intrusion Detecon .
2.
Check Enable.
3.
Select a Region. For the detecon region sengs, refer to
Draw Area .
4.
Set rules.
Sensivity Sensivity stands for the percentage of the body part of an acceptable target
that enters the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands
for the target body part that goes across the pre-dened region. ST stands for
the complete target body. The higher the value of sensivity is, the more
easily the alarm can be triggered.
Network Camera User Manual
40
Loading ...
Loading ...
Loading ...