Hikvision DS-2XS6F45G0-I/4G User Manual

Loading ...

6.2.7 Set Region Exing Detecon

It is used to detect objects exing from a pre-dened virtual region. If it occurs, the device can take

linkage acons.

Before You Start

Go to VCA → VCA Resource , and select Smart Event.

Steps

Go to VCA → Smart Event → Region Exing Detecon

Check Enable.

Select one Region. For the detecon region sengs, refer to Draw Area .

Set the detecon target, sensivity and the target validity.

Sensivity It stands for the percentage of the body part of an acceptable target that goes

across the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands for

the target body part that goes across the pre-dened region. ST stands for the

complete target body. The higher the value of sensivity is, the more easily

the alarm can be triggered.

Detecon

Target

Human and vehicle are available. If the detecon target is not selected, all the

detected targets will be reported, including the human and vehicle.

Target

Validity

If you set a higher validity, the required target features should be more

obvious, and the alarm accuracy would be higher. The target with less obvious

features would be missing.

Figure 6-6 Set Rule

Network Camera User Manual

Loading ...

Hikvision DS-2XS6F45G0-I/4G 4MP Wildlife Network Camera