DS-2XS6F45G0-I/4G User Manual

Loading ...

Chapter 7 Network Sengs

7.1 TCP/IP

TCP/IP sengs must be properly congured before you operate the device over network. IPv4 and

IPv6 are both supported. Both versions can be congured simultaneously without conicng to

each other.

Go to Conguraon → Network → Basic Sengs → TCP/IP for parameter sengs.

NIC Type

Select a NIC (Network Interface Card) type according to your network condion.

IPv4

Two IPv4 modes are available.

DHCP

The device automacally gets the IPv4 parameters from the network if you check DHCP. The

device IP address is changed aer enabling the funcon. You can use SADP to get the device IP

address.

Note

The network that the device is connected to should support DHCP (Dynamic Host

Conguraon Protocol).

Manual

You can set the device IPv4 parameters manually. Input IPv4 Address, IPv4 Subnet Mask, and

IPv4 Default Gateway, and click Test to see if the IP address is available.

IPv6

Three IPv6 modes are available.

Route Adversement

The IPv6 address is generated by combining the route adversement and the device Mac

address.

Note

Route adversement mode requires the support from the router that the device is connected

to.

DHCP

The IPv6 address is assigned by the server, router, or gateway.

Manual

Network Camera User Manual

Loading ...

Hikvision DS-2XS6F45G0-I/4G 4MP Wildlife Network Camera