Loading ...
Loading ...
Loading ...
3. Keep Master Volume at 0 position.
4. Turn Mic Volume to 0 position.
5. Switch on the Power Gig unit.
6. Slowly turn Mic Volume clockwise until you achieve appropriate volume setting. This
is determined by the CLIP LED indicator light. Proper function is achieved when the
CLIP indicator lights up at peak levels, it should never be in constant on position.
7. The above adjustment matched the microphone preamp to the input volume of the
Power Gig unit.
8. Now turn up the Master Volume to necessary volume by rotating clockwise.
Always stand behind the Power Gig when making your microphone adjustments to avoid
feedback distortion.
You can choose to hook up two microphones to your Power Gig in the following manner.
Set up microphone #1 as instructed above. Using same set up instructions, insert mi-
crophone #2 into second ultra-low noise Mic/Line input which features its own separate
Volume control. Use this Volume control to increase the microphone level and balance the
inputs between the two microphones before attempting to adjust the Master Volume.
Multi-Microphone Hook Up
4
2
POWER
3
8
1
5
6 6
CLIP
OFF
ON
POWER
POWER
Loading ...
Loading ...
Loading ...