Loading ...
Loading ...
Loading ...
BT
1. MP3 Player controls. Previous / Next track buttons also serve as volume
controls. For track control quickly press button. For volume control press and
hold button. Press Play button once to play track, press again to pause.
2. USB and SD/MMC Card input.
3. Mode control switches between input modes: Bluetooth, USB, and SD/MMC.
4. Digital delay eect (echo) control panel.
• The Repeat knob controls the rate of the delay.
• The Delay knob controls the time interval of the delay.
• The Level knob adjusts the mix level of the eect sound.
5. 2 band equalization control panel.
• Bass adjust the low frequencies to +/-15dB.
• Treble adjust high frequencies to +/-15dB
6. This knob controls the Mic input volume.
7. Multipurpose input port.
• Mic input port accepts XLR type connectors and is designed to suit a wide
range of balanced and unbalanced signals. We recommend using professional
balanced dynamic, condenser or ribbon mics as they are least likely to be
aected by interference. Low cost, high impedance mics can be used,
however the level of background noise is higher since an unbalanced circuit is
far more susceptible to interference.
• Line input port accepts balanced and unbalanced 1/4˝ TRS plugs. It accepts
signals from a variety of sources such as keyboards, electronic drums, tape
recorders, mixers, etc. It will not process microphone input. When you use an
unbalanced 1/4˝ TRS plug, the line input automatically turns the ring into
ground.
8. Auxiliary / MP3 input selector switch.
9. Pre-Amp RCA input / output jacks.
10. Auxiliary input / output volume control.
11. Master volume control knob.
12. Power LED indicator.
13. Amplier clip limit LED indicator.
14. Power switch
15. IEC AC power socket
16. Fuse compartment
17. Variable voltage selector switch (115v / 230v)
Loading ...
Loading ...
Loading ...