Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/28076770-ds-k1t805mbwx/bg46.png)
Enable M1 card and authencang by presenng M1 card is available.
M1 Card Encrypon
Sector
M1 card encrypon can improve the security level of authencaon.
Enable the funcon and set the encrypon sector. By default, Sector 13 is encrypted. It is
recommended to encrypt sector 13.
Enable EM Card
Enable EM card and authencang by presenng EM card is available.
Note
EM card is supported when the device connects a peripheral card reader that supports
presenng EM card.
Enable CPU Card
Enable CPU card and authencang by presenng CPU card is available.
Enable DESFire Card
The device can read the data from DESFire card when enabling the DESFire card funcon.
Enable FeliCa Card
The device can read the data from FeliCa card when enabling the FeliCa card funcon.
Set RS-485 Parameters
You can set the RS-485 parameters including the peripheral, address, baud rate, etc.
Tap → Access Control → RS-485 .
Tap Save to save the sengs aer the conguraon.
Peripheral Type
Select a peripheral from the drop-down list according the actual situaon. You can select from
Card Reader, Extension Module, or Access Controller.
Note
Aer the peripheral is changed and saved, the device will reboot automacally.
RS-485 Protocol
Private
The device can connect with the third party device via RS-485.
OSDP
Standard RS-485 protocol.
RS-485 Address
Access Control Terminal User Manual
57
Loading ...
Loading ...
Loading ...