Loading ...
Loading ...
Loading ...
Figure 8-3 Wi-Fi Sengs Page
2.
Check Wi-Fi.
3.
Add Wi-Fi.
-
Click Manual Add, and enter SSID and Security Mode.
4.
Select a Wi-Fi
-
Click Connect of a Wi-Fi in the list and enter the Wi-Fi password.
-
Click Manual Add, and enter SSID and Security Mode. Click OK.
5.
Oponal: Set the WLAN parameters.
1) Set the IP address, subnet mask, and default gateway. Or enable DHCP and the system will
allocate the IP address, subnet mask, and default gateway automacally.
6.
Click Save.
Device Hotspot
Aer you turn on the device hotspot, you can use your phone to connect to the device hotspot and
congure it.
Click Conguraon → Network → Network Sengs → Device Hotspot .
Click Enable Device Hotspot to enable the funcon and view the device hotspot name.
Click Save.
You can follow these steps to enable the AP.
1. Connect to the device hotspot with your mobile phone by entering the hotspot password. The
acvaon page will pop up.
Access Control Terminal User Manual
29
Loading ...
Loading ...
Loading ...