Loading ...
Loading ...
Loading ...
Fig. 19
Make sure that the following requirements are fulfilled
q
Max. baking tray dimensions are adhered to
(see 9.1 Technical specifications) .
q
Baking tray has cooled to room temperature.
q
The bottom door stopper is set at least one position up.
When door 90° is open:
u
Slide the baking tray onto the lower side runs.
-or-
If baking tray is uneven:
u
Use the supplied support rails.
Fig. 20
u
Snap support rails into the lowest runs.
When door 90° is open:
u
Slide the baking tray in on the support rails.
7.6 Variable bottle shelf
7.6.1 Using the bottle shelf
Use the variable bottle shelf or the glass panel placed on
the fridge floor.
Fig. 21
u
Remove the glass shelf and store separately.
u
Place the bottles with the base pointing backwards
facing the rear wall
Note
If the bottles protrude over the front of the bottle shelf:
u
Move the bottom door rack higher up.
7.6.2 Removing the bottle shelf
You can remove the bottle shelf for cleaning.
u
Remove the glass panel above the bottle shelf.
Fig. 22
u
Lift the bottle shelf at the front and pull out.
Note
Liebherr recommends the following:
Do not place any goods on the drawer cover below.
7.6.3 Inserting the bottle shelf
Fig. 23
u
Slide in the bottle shelf until it engages and push down.
w
The lugs at the back of the bottle shelf are connected
automatically.
w
LED lights up.
7.7 Drawers
You can remove the drawers for cleaning.
The shelves below can be used for storage until the
drawers are replaced.
How the drawers are removed and inserted differs
depending on the pull-out system. Your appliance can
include a variety of pull-out systems.
Note
Insufficient ventilation results in an increase in energy
consumption and reduction of the refrigerating perform-
ance.
u
Leave the bottom drawer in appliance!
u
Never obstruct the vents on the interior rear wall!
Equipment
* Depending on model and options 21
Loading ...
Loading ...
Loading ...