Loading ...
Loading ...
Loading ...
14.4. Changing blower external static pressure
The air handler is equipped with an adjustable static pressure setting. The available settings are shown in
the table below.
Model Available ESP [in. WG]
SVZ-KP12
0.30 0.50 0.80
SVZ-KP18
SVZ-KP24
SVZ-KP30
SVZ-KP36
The air handler will be set to 0.50 ESP from the factory.
The air handler’s static pressure can be changed through the mode/function settings in the controller.
Please refer to the installation manual for the controller on how to change this option. Depending on the
controller used, the mode/function will be either 08 for mode (PAR-31 & Simple MA) or 108 for function
(MHK1).
Vertical, Horizontal Left, Horizontal Right External Static Pressure Setting
External Static Pressure Setting No. of Mode/Function 08/108 Setting No. of Mode/Function 10/110 (Factory Setting)
0.3 in. WG [75Pa] 1 1
0.5 in. WG [125Pa]
(Factory Setting)
2 1
0.8 in. WG [200Pa] 3 1
SVZ-KP12,18, 24, 30, 36NA
© 2022 Mitsubishi Electric US, Inc. 48 Specifications are subject to change without notice.
ENGLISH
Loading ...
Loading ...
Loading ...