Loading ...
Loading ...
Loading ...
10
Option 2 - Power Cord Kit Installations
For optional power cord kit installations, follow the instructions
supplied with the power cord kit. See the “Assistance or
Service” section for information on ordering.
NOTE: Use only with range hood cord connection kits that have
been investigated and found acceptable for use with this model
range hood.
14. Complete the Installation
■ Install a 120 V, 75 W maximum, incandescent light bulb with
E26 base. See “Replacing the Incandescent Light Bulb” in
the “Range Hood Care” section.
■ If removed previously, replace the lter. See “Grease or
Charcoal Filter” in the “Range Hood Care” section.
For vented installations: Install a metal lter.
For non-vented (recirculating) installations: Install a
charcoal lter.
■ Check the operation of the range hood fan and light. See the
“Range Hood Use” section.
If the range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect the power and check the wiring connections.
NOTE: To get the most efcient use from your new range hood,
read the “Range Hood Use” section.
RANGE HOOD USE
RANGE HOOD CARE
Cleaning
The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after
the cooking is complete to clear all smoke and odors from the
kitchen.
The hood controls are located on the front panel of the range
hood.
Range Hood Controls
Operating the light
Press the light switch to the left to turn the light On. Press the
light switch to the right to turn the light Off.
IMPORTANT: Flicker and visual uctuation can be present every
time the lamp switch is activated. The duration of the icker will
depend on the manner and velocity that the light switch changes
position.
Operating the fan
The fan has 2 speeds.
Press the fan switch to the left for Low speed. Press the fan
switch to the right for High speed. Return the fan switch to the
center to turn the fan Off.
B
A
C
A. LED light housing and cover
B. Grease lter retainer
C. Grease lter
A
B
Off
On
Low
Off
High
A. On/Off light switch
B. Fan speed switch
IMPORTANT: Clean the hood and grease lters frequently
according to the following instructions. Replace the grease lter
before operating hood.
Exterior Surfaces:
IMPORTANT: Do not use soap-lled scouring pads, abrasive
cleaners, cooktop polishing creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use cleaners that
contain chlorine.
Cleaning Method:
■ Liquid detergent or all-purpose cleaner:
Rinse with clean water and dry with a soft, lint-free cloth.
■ Glass cleaner to remove ngerprints.
■ For stainless steel models, use Stainless Steel Cleaner and
Polish: See the “Assistance or Service” section to order.
■ For stainless steel models, rub in the direction of the grain to
avoid scratching or damaging the surface.
Grease or Charcoal Filter
To Clean the Filter:
1. Remove the screw from the grease lter retainer.
2. Push the grease lter retainer to release the lter.
A
C
A
B
A. Filter retainer screws
B. Grease lters
C. Filter retainer
Loading ...
Loading ...
Loading ...