Loading ...
Loading ...
Loading ...
772/773
Calibration Manual
2
Safety Information
In this manual, a Warning identifies conditions and procedures that are hazardous to the
user. A Caution identifies conditions and procedures that could cause Meter damage,
equipment under test damage, or permanent loss of data.
XWWarning
To prevent electrical shock or personal injury, and to prevent
damage to the Meter, follow these guidelines:
• Read this manual before use and follow all safety
instructions.
• Use the Meter only as this manual recommends. To use the
Meter incorrectly, compromises the safety features of the
Meter.
• Examine the case before you use the Meter. Look for
cracks, missing plastic or missing pieces of the clamp and
cable. Do not use if the clamp or Meter is damaged.
• Do not use on voltages >33 V ac rms, 47 V ac peak, or 70 V
dc.
• Do not use to measure ac current.
• Do not use to measure ac voltage.
• Do not work alone.
• Use maximum precautions when you work near bare
conductors or bus bars. If you touch the conductor, you
can receive an electrical shock.
• To prevent incorrect indications that can cause electrical
shock and injury, replace the batteries when the low-
battery indicator (B) appears.
• Follow local and national safety codes. You must use
protective equipment to prevent an electrical shock and arc
blast injury where hazardous live conductors are exposed.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...