Loading ...
Loading ...
Loading ...
30
AXIS P1346/-E/AXIS P1347/-E - Events
Triggered Event
A triggered event can be activated by:
• Input ports
• A manual trigger – using the manual trigger button on the Live View page or through the VAPIX® Application Pro-
gramming Interface (API)
• IR cut filter
• Movement in a motion detection window
• Audio – when the sound level rises above or falls below the alarm level (configured under Video & Audio > Audio
Settings, see page 22).
• On boot – for example after power loss
• Camera tampering, see page 31.
• Disk full – when the local storage disk (SD memory card) has less than 1MB free memory
How to set up a triggered event
The following example describes how to set up the camera to upload images when a door is opened.
1. Click Add triggered... on the Event Types page. The Triggered Event Type Setup page appears.
2. Enter a descriptive Name for the event, such as Door open.
3. Set the Priority - High, Normal or Low.
4. If View Areas are enabled, select the view area this event will use.
5. Set the Respond to Trigger... parameters to define when the event is active, for example, after office hours.
6. Select the Input ports alternative from the Triggered by... drop-down list and specify the state (active, inactive or
change) that the input must enter for the event to be triggered.
7. Set the When Triggered... parameters, that is define what the camera will do if the door is opened. To upload images,
select Save stream and enter the required information. See
Save stream,
on page 30.
8. Click OK to save the event in the Event Types list.
Please see the online help for descriptions of each available option.
Note:
Up to 10 event types can be configured in the camera, and up to 3 of these can be configured to upload images. File
names can be formatted according to specific requirements. See File Naming & Date/Time Formats in the online
help.
Save stream
To upload images to an FTP or HTTP server, send images by email or to save images to the local storage disk, check the Save
stream box.
Please see the online help for more information.
Scheduled Event
A Scheduled event can be activated at preset times, in a repeating pattern on selected weekdays.
How to set up a scheduled event
The following example describes how to configure the camera to save images from pre-programmed time periods.
1. Click Add scheduled... on the Event Types page.
2. Enter a descriptive Name for the event, such as Scheduled e-mail upload.
3. Set the Priority (High, Normal or Low).
4. If View Areas are enabled, select the view area this event will use.
5. Set the Activation Time parameters (24h clock) for the event. For example, select Recurrence pattern and let the
event start on Sundays at 13.00 with a duration of 12 hours.
Loading ...
Loading ...
Loading ...