Loading ...
Loading ...
Loading ...
16
AXIS P1346/-E/AXIS P1347/-E - Video & Audio
Video & Audio
Video Stream
To enable view areas, go to Setup > Video & Audio > Camera Settings > View Areas. If View Areas have been enabled, the
defined View Areas are listed here and each View Area is given its own video stream settings. For more information about view
areas, see page 19.
The video stream settings appear under four
different tabs:
•Image
• Audio
• H.264
•MJPEG
Preview
For a preview of the image before saving, select
the Video Format and click Open....
The pixel counter shows the number of pixels in
an area of the image. This is useful in face
identification for example, for it regulates the
pixel resolution of an object, such as a face. Use
the mouse to move and resize the rectangle, or
enter the number of pixels in the Width and
Height fields and click Apply.
When satisfied with the settings, click Save.
Image
Image Appearance
Use these settings to modify the image resolution and compression. Setting the compression level affects the image quality
and the amount of bandwidth required; the lower the compression, the higher the image quality with higher bandwidth
requirements. The image can also be mirrored (reversed) and rotated.
Capture mode defines how image data is taken from the image sensor prioritizing either resolution or frame rate. The capture
mode is configured the first time the camera is accessed, see page 8, but can be re-configured later, see
Capture mode,
on
page 18.
See the online help files for more information.
Video Stream
To avoid bandwidth problems on the network, the frame rate allowed to each viewer can be limited. Select the Unlimited
radio button option to allow the highest available frame rate; or select the Limited to radio button option and enter a value
(1-30) fps in the field.
Loading ...
Loading ...
Loading ...